bm kGLASS CUTTING MACHINE BMK 1 The cutting machine is equipped with a spindle. The shaft (diameter of 40mm) is mounted in sliding bearings. The shaft tip (with an internal M 12 thread) is conical (ratio 1:5). The cutting machine is separated from the tray yet, at the same time, it is solid due to its concrete base. The drive is realised with a POLY-V belt and six-step pulleys which guarantees a transfer of sufficient power and excellent dynamic performance. The back side of the case carries a safe 24V halogen lamp which illuminates the cutting disc. Optionally, the machine can be supplied with a working table, tray made of laminated plastics, water distribution piping, splash cover, glasscutter's stool, etc. This vertical cutting machine has been designed for manual cutting of various decorative patterns on glass articles and, in particular, mat cutting. A design of this machine is modular, so that the main welded frame fits into any desired structure. The cutting machine is usually supplied as a two-piece set consisting of the machine placed on a concrete base and a separate tray made of fibreglass reinforced plastic (the tray is supported with a stand). As for technological design, this is the best solution. TECHNICAL DATA Dimensions of the machine: Depth [mm] Height [mm] Width [mm] Machine weight [kg] Dimesions of the machine base [mm] Height of the spindle axis [mm] Total input of the machine [kVA] Electric motor model IM B3 Output [kW] Revolutions [rpm] max. noise level [dB] Electric power supply 3+PE 50Hz, 400V

bm kGLASS CUTTING MACHINE BMK 2 The cutting machine is driven by a two-speed asynchronous motor mounted in the rear section of the concrete base. Power transmission of the motor is carried out with a POLY V-belt that guarantees a transmission of sufficient power having excellent dynamic qualities. Six-step cone pulleys are used. A low-voltage (24V) halogen lamp illuminating the cutting disc is mounted in the rear part of the cast-iron box. If required by the customer, this cutting machine can be equipped with a work-table, a tray made of fibreglass reinforced plastic, a water distribution system,...

FLAT - GRINDING MACHINE BMH-D/1,5 This is a versatile machine giving the possibility to use loose or bonded abrasives in a wide range of spindle revolutions. The machine aslo meets stringent requirements specified for the use of advanced types of diamond-impregnated tools. A wire-reinforced concrete base makes the grinding machine perfectly rigid. A specially designed spindle is mounted at the center of the concrete base. The grinding machine is driven with the aid of an asynchronous motor that is located below a protecting hood on a tensioning plate in the rear cestion of the machine. A steel...

bm kBELT GRINDING MACHINE PB 100/3000 This machine is especially designed for flat working of glass or similar materials cooled with water or water emulsion. It is an ideal machine for bevelling the edges and removal of overpresses or other production faults. The abrasive band and its grit must be chosen with regards to the processed material and required quality of the ground surface. Width [mm] ^^650 Machine weight [kg] 140 Water consumption [l/min] 2 Total power input [kVA] 1,9 El. motor Model IM B3 output [kW] 1,1 /1,4 Motor revolutions [rpm] 1420/ 2845

bm kGLASS - TOP GRINDING MACHINE BHO 01 The machine is designed for fine grinding of the top edges of thin wall glass articles. The products are loaded manually and ground automatically according to parameters set on the control panel. The clamping head fastens the product bottom up for subsequent grinding. The clamping head is a three-jaw type one, its fastening force is constant and comes from a spring situated in the central shaft. The clamping head revolutions are adjustable and range from 0.9 to 3.2 revolutions per second. The clamping head can be tipped by 35° towards the operator to ease...

bm kCRACKING OFF MACHINE P-22 The structure of the vertical guide with two horizontal arms equipped with burners is highly rigid and enables an easy and accurate adjustment of the burners. The shaft is equipped with a spring clutch that makes it easier to fix the glass article on the rotating table. Thanks to this clutch, the rotation of the table can be stopped by hand. Dimensions of the machine: Depth [mm] 610 Revolutions of rotating tables (3 speeds) [min-1] 33/42/51 Working table height [mm] 900 Diameter of rotating table [mm] 250 Max. height of the processed article [mm] 500 Input of electric...

bm kGLASSMAKER’S FIXTURE BM BOY 05 ’’tramping device” Using this fixture in manual production of blown glass results in substantial reduction of labour. Last but not least, there is a substantial reduction in consumption of water because the BM BOY is equipped with a closed cooling circuit. The main difference of this fixture, compared to other similar products, consists in a profound simplification of the mould mounting. This also results in much shorter time necessary for the mould exchange. Dimensions of the machine: Depth [mm] Approximate weight (cooling water excluded) [kg] Height of the...