ELECTRICAL INSULATING BLANKET CLASS 0 (A,Z) EIP0-1,5x0 BASIS WEIGHT Top side - cloth impression Bottom side - cloth impression TENSILE STRENGTH Electrical insulating blanket certified according to the IEC 61112:2009 standard in class 0, with a specified operating voltage of 1,000 V DC and 1,500 V AC. Also certified according to categories A and Z, resistant to acids and ozone. Vulcanized elastomer with top and bottom cloth imprint in orange with thickness 1.5 mm (+0.4/-0.2) and a basic weight 1,6 kg/m2. Marking is done by precuring a lengthwise marking tape covering the entire roll length. This way of marking is durable and unerasable. Blanket achieve minimum tensile strength 12 MPa and elongation at break minimum 300%. We supply it in rolls 1 m or 1.2m which allows you to cut parts of different shapes and sizes according to the needs of end users. It has many uses. On request we can provide custom cuts. CONFIGURATION OPTIONS THICKNESS 1.5 mm LENGTH ADDITIONAL INFORMATION As standard, we supply rolls 1 or 1.2 m wide and 10 m long. However, we can also provide custom custs: 0.6x0.6 m; 0.6x1 m; 1x1 m; 1.2x1 m or others. RESISTANCE ACCORDING TO IEC 61112:2009 Mechanical puncture resistance Dielectric tests according given class YES Ageing tests Low temperature folding test Flame retardance test Ozone resistance Acid resistance BOGUMA, Ltd., Továrenská 314, 956 18 Bošany, Slovak Republic Business Register Record, Trenčín, Section Ltd., Record No. 19109/R IČO: 35 922 087, IČ DPH: SK2021963625 Billing Information: SK12 1100 0000 0029 4107 3171, SWIFT: TATRSKBX Tel.: +421 38 5426 307, +421 38 5426 308, [email protected], www.boguma.sk