*mydirectindustry

EIP0-1,0x0

Product catalog summary

Product Overview: The Electrical Insulating Blanket EIP0-1,0x0 is a flexible covering material made from high-quality EPDM elastomer. It is designed for use in both interior and exterior environments to cover wires that are either powered or grounded. The blanket is available in a thickness of 1.0 mm with a tolerance of +0.4 mm and widths ranging from 1000 mm to 1200 mm. It is supplied in rolls of 10 meters in length.

Specifications: The blanket features a smooth surface on both sides and is marked with a red tape along its length to indicate its electrical class (Class 0). It is certified according to the IEC 61112:2009 standard for Class 0, with a working voltage of 1000 V. Additionally, it is certified for resistance to acids and ozone (categories A and Z).

Performance: The product demonstrates a tensile strength of at least 16 MPa and a tear resistance of at least 500%. It has passed various tests including mechanical puncture resistance, dielectric tests, ageing tests, low temperature folding tests, flame retardance tests, and ozone resistance tests.

Configuration Options: The blanket is available in the following configurations:

Thickness: 1 mm (+0.4 mm/-0.0 mm)
Width: 1000 mm (+/- 10 mm) or 1200 mm (+/- 10 mm)
Length: 10 m (+/- 200 mm)

Additional Information: Standard roll sizes are 1 or 1.2 meters wide and 10 meters long, with custom cuts available in various dimensions. The product is manufactured by BOGUMA, Ltd., located in Bošany, Slovak Republic.

Catalog excerpts

THICKNESS BASIS WEIGHT HARDNESS ENVIRONMENT TENSILE STRENGTH Electrical insulation blanket EIP0-1,0x0 is a flexible covering material made of high-quality EPDM elastomer used to cover wires that are powered under voltage or grounded, suitable for interior and exterior environments. It is made in a thickness of 1.0 mm (+0.4; -0.0) and widths of 1000 - 1200 mm. We deliver it in rolls of 10 m length. It has a smooth surface on both sides. It is marked along the entire length of the board with a marking tape according to the corresponding electrical class (class 0 - red tape). The electrical insulation blanket EIP0-1,0x0 is certified according to the IEC 61112:2009 standard in class 0, with a specified working voltage 1000 V. Also certified according to category A and Z, i.e. resistant to acids and ozone. Tensile strength reaches at least 16 MPa and tear resistance is at least 500%. CONFIGURATION OPTIONS ADDITIONAL INFORMATION As standard, we supply rolls 1 or 1,2 m wide and 10 m long. However, we can also provide custom custs: 0,6x0,6 m; 0,6x1 m; 1x1 m; 1,2x1 m or others. Mechanical puncture resistance YES Dielectric tests according given class YES Ageing tests YES Low temperature folding test YES Flame retardance test YES BOGUMA, Ltd., Tovarenska 314, 956 18 Bosany, Slovak Republic Business Register Record, Trencm, Section Ltd., Record No. 19109/R ICO: 35 922 087, IC DPH: SK2021963625

Open the catalog to page 1