RMSN Rotary Magnetic Scale Nonius Indicating movements with RMSN is simple, precise and economic. RSMN rotary magnetic are used in continuous or discrete positioning, motion control, such as commutation, and many other solutions. BOGEN manufactures rotary scales on the flange, outer or inner diameter. Production processes cover both prototype quantities and large series production. The combination of BOGEN encoders and scales with optimized pole pitches ensure highest system accuracy. Features and Benefits • wide range of selectable magnetic scale characteristics: low to very high accuracy, several pole pitches, different scale geometries, a variety of magnetic materials • two track magnetization RMSN rev 3.0 (2022/05/30) • customizable for many applications • no wear from usage • resistant to dust, cooling lubricant emulsion, oil, etc.

Features Magnetic Properties (Elastomer-bonded ferrite/Isotropic) residual induction (Br) mT coercive force (Hcb) kA/m intrinsic coercive force (Hcj) kA/m maximum energy product (Bhmax) MGOe reversing temperature modulus % / °C physical properties tensile strength N/mm²(MPa) hardness shore D density g/cm³ temperature range °C Chemical Properties hydraulic oil (23 °C × 72 h) alcohol (23 °C × 72 h) weak alkali (23 °C × 72 h) detergent (23 °C × 72 h) aromatic solvent (23 °C × 72 h) organic, anorganic acid (23 °C × 72 h) aliphatic solvent (23 °C × 72 h) water (60 °C × 72 h) Magnetic Properties (Hard...

hard ferrite hard ferrite elastomer bonded ferrite on hub D1 (Incremental Track) D1 (Incremental Track) Incremental Track elastomer bonded ferrite on hub Incremental Track Incremental Track Available Dimensions RMSN Axial OD order no. order code (elastomer/ hard ferrite) hard ferrite) (elastomer/ hard ferrite) Available Dimensions RMSN Radial OD order no. 51218 order code (elastomer/ hard ferrite) 24.50 (elastomer/ hard ferrite) [mm] magnet material: E = elastomer; F = hard ferrite; hub material: S = steel; A = aluminum

Order Code Sensor RMSN M-N - S - P - M - H - G- P code number of pole pairs magnetization material radial, on the circumference (no input required) axial, on the end surface pole pitch of nonius track in millimeter, e. g. 1.28 hard ferrite (8/22) elastomer bonded ferrite vulcanized ferrite plastoferrite aluminum number of pole pairs: Master-Nonius, e. g. 32-31 sheet metal 300 arc seconds (no input required) only necessary if deviates from default without protection (no input required) stainless steel fibre plastic * standard parameters are bold Rotary Magnetic Scale Nonius, 32 master-31 nonius...