LMSN Linear Magnetic Scale Nonius
7Pages

LMSN Linear Magnetic Scale Nonius BOGEN produces magnetic scales for a large variety of different applications. Linear Magnetic Nonius Scales can be encoded two or three tracks. Using different accuracy classes scales can be tailored to your requirements. Perfect fit for IC-MU series encoder chip from IC-Haus. Absolute Measuring Linear Applications Counting and Controlling Tasks Features and Benefits • different accuracies available on demand • two or three track magnetization • different scale geometries • customizable for many applications LMSN rev 3.0 (2022/05/24) • no wear during operation • non-contact measurement • resistant to dust, cooling lubricant emulsion, oil, etc. BOGEN Magnetics GmbH · Potsdamer Straße 12-13 · 14163 Berlin · Germany Fon +49 (0) 30 81 00 02 - 0 · Fax +49 (0) 30 81 00 02 - 60 · magnetics@bogen-magnetics.com · www.bogen-

Characteristics Linear Magnetic Scale accuracy class magnetic tape: elastomer filled with ferrite; carrier tape: stainless steel standard: 6, 8, 10 width [mm] thickness [mm] pole pitch [mm] magnetic flux of amplitude operating temperature expansion coefficient minimum bending radius [mm] length in pieces 3-track: 12, 15 0.5 to 1.66 (depending on scale setup) standard for IC-MU: 1.28; 1.5 ; 2.0 dependant on pole pitch - 20 °C to + 100 °C max. ~ 17 x 10-6/K 65 see „Scale Dimensions“ next page mounting holes for pieces multiple hole combinations and angle cuts possible (on request, see below)...

Scale Dimensions with Standard Layer Stack-Up cover tape (stainless steel) magnetic tape (elastomer) magnetic tape (elastomer) carrier tape (stainless steel) magnetic tape (elastomer) carrier tape (stainless steel) adhesive tape (1) carrier tape (stainless steel) adhesive tape (1) magnetic tape (elastomer) *) If ordering length is greater than 1500 mm, cover tape with attached adhesive tape is delivered as separate accessory. Scale Dimensions with Optional Layer Stackup (1) For individual scale setups following layer dimensions can be used magnetic tape carrier tape adhesive tape standard...

Optional Accessories • Extruded Aluminum Profile (please contact our application engineers for the right profile for your LMS) • Scale Applicator (for easy and precise installation of the scale) • Clamps for Scale Ends 90°

Standard Mounting Holes

Order Code LMS N - P - L - W - H - A - C - K - T - EB code track parameters explanation (1) two tracks number of tracks (up to nine) pole length 1.28 MM (for IC-HaUs chip IC-MU) master pole length of nonius code 8 mm 8 mm Elastomer (only for P95-05 extrusion) 10 mm stainless steel carrier tape (only for P95-05 extrusion) 10 mm 12 mm 15 mm 20 mm 25 mm 1 mm magnetic tape, 0.3 mm carrier tape 1 mm magnetic tape, 0.1 mm carrier tape 0.5 mm magnetic tape, 0.3 mm carrier tape 0.5 mm magnetic tape, 0.1 mm carrier tape accuracy class cover tape adhesive tape text imprint ± 10 µm/m (only delivered...

Ordering Example number of tracks: 2 track1: Nonius ~1.37 mm pole pitch, 15 pole pairs S-start pole, 3 mm track width track2: Master 1.28 mm pole pitch, 16 pole pairs N-start pole, 3 mm track width accuracy class: ± 03 µm/m total width: 6 mm total height: 1.43 mm total length: 16 mm (shortened Nonius) usable measuring length: 3 mm without cover tape with adhesive tape with customized imprint: M -> (arrow is pointing towards master track) number of tracks: 3 track1: Segment ~1.55 mm pole pitch, 992 pole pairs S-start pole, 3.5 mm track width track2: Master 1.5 mm pole pitch, 1024 pole pairs...