IKS11 Incremental Magnetic Sensing Head With the compact incremental magnetic sensing head IKS11, BOGEN offers superb performance in a small form factor. If space is decisive IKS11 is an excellent choice. IKS11 is the preferred choice for automation, instrumentation and motion control applications. In combination with BOGEN precision scales, measurement solutions for almost every application can be custom-tailored. compact size rotary and linear applications scales with or without index Features and Benefits • all important operating parameters can be reconfigured by the user at any time • LEDs indicating input signal quality, error and configuration mode • extra small size for implementation in confined spaces IKS11 rev 3.0 (2021/12/15) • wide range of resolution options available • no wear due to non-contact operation

Features resolution energy consumption (without load) operating temperature storage temperature adjustable parameters 0.020 to 500µm, depending on pole pitch and interpolation tbc - 40 to + 125 °C - 40 to + 150 °C resolution, maximum output frequency, signal conditioning, filter characteristic, pole pitch, error masks, ABZ or UVM output Sensing Head Variants pole pitch (mm) reference supply voltage interface (without load) 1, 2, 2.54, 5 periodic reference signal from the pole pitch or from reference marks, requires 2-track magnetic tape with incremental track and reference track 5 V ± 10% (3.3...

Further Selection (Ordering Parameters) pole pitch maximum output frequency per channel max. movement speed Vmax [m/s] x table 1: maximum output frequency and speed as a function of pole pitch and resolution R resolution (resolution is post quadrature), R = P / Rf max. output frequency per channel (from 60 kHz to 3500 kHz) max. movement speed, Vmax is limited by following formulas: Vmax = 4 * F * R and Vmax = P * 50 kHz resolution factor (resolution factor available from 4 to 65536 in integer increments of one)

Reference Track (Hall Chip) Incremental Track LED dimensions without tolerances according to DIN ISO 2768 m LED Signaling The RGB-LED of the IKS11 lights blue if the head is in programming mode. It lights red if there is an error. Error types activating the LED can be configured. LED lights green to show an active input signal, the brightness indicates the quality of the input signal. The user may change the configuration of the IKS11 by setting it into programming mode. The 5V supply version of the IKS11 is set into programming mode by holding the !PROG input LOW. The 3V supply version overdrives...

Magnetic Sensing Head Order Code Parameters IKS11 - Z - P - D - R - F - L code Z1. ... Z maximum output frequency per channe [kHz] periodic reference signal from the pole pitch, length of reference signal ... counts (8) from reference marks, requires 2-track magnetic tape with incremental track and reference track, length of index signal 1, 2 or 4 counts (8) 1 mm 2 mm 2.54 mm 5 mm RS422 ABZ RS422 UVW TTL ABZ TTL UVW 0.5 μm resolution, standard for a pole pitch of 1 mm 1 μm resolution, standard for a pole pitch of 2 mm other non-default resolutions, see section “Resolution and Speed” in table...

Linear and Rotary Scales • LMS: linear magnetic scale, from a few millimeters to many meters • LMSBI: linear magnetic scale bar incremental for high accuracy applications • RMSI: rotary magnetic scale incremental, in diameters from 10 mm to 1 m • standard scale width (with reference track): 8 mm and 10 mm; 6 mm on request • available scale accuracy classes: A3, A10, A20, A40, A100 • available pole pitches: 1 mm, 2 mm, 2.54 mm, 5 mm LMS Linear Magnetic Scales Order Code Examples linear magnetic scale number of tracks: 1 track1: incremental 1 mm pole pitch accuracy class: ±20 µm/m LMS-I1-L1000-W10-A20-K...

LMS Linear Magnetic Scales Order Code Examples linear magnetic scale number of tracks: 2 track1: Incremental 1 mm pole pitch, 5 mm track width track2: Reference NSN reference every/at XX mm / at center, 5 mm track width LMS2-I1-Z-L1000-W10-A20-K accuracy class: ±40 µm/m total width: 10 mm total height: 1.43 mm total length: 1000 mm usable measuring length: 990 mm without cover tape with adhesive tape with BOGEN standard imprint linear magnetic scale number of tracks: 2 track1: Incremental 2 mm pole pitch, 5 mm track width track2: Reference NSN reference every/at XX mm / at center, 5 mm track...