RMSI and RMSNRotary Magnetic Scale Standard Programme Motion control and angle measuring have never been easier and more reliable with BOGEN‘s rotary magnetic scales standard programme. Our portfolio of standard rotary magnetic scales is available from stock and includes a choice of different dimensions that can suit various tasks and applications. Features and Benefits • incremental rotary scales (reference mark available on request) • absolute rotary scales for use with existing Nonius sensors • axial and radial magnetization • high quality materials and precisely machined hubs • high resistance to dust, cooling lubricants, oil, etc. • easy installation by gluing or press-fitting BOGEN Magnetics GmbH • Potsdamer StraRe 12-13 • 14163 Berlin • Germany

article number general tolerance ISO 2768-mK, if not indicated otherwise 121 for more details on sensor type please refer to ..Corresponding Absolute Sensing Heads for Nonius Rotary Scales" section on the last page of this document BOGEN Magnetics GmbH • Potsdamer Strafie 12-13 • 14163 Berlin • Germany

article number general tolerance ISO 2768-mK, if not indicated otherwise 121 for more details on sensor type please refer to ..Corresponding Absolute Sensing Heads for Nonius Rotary Scales" section on the last page of this document BOGEN Magnetics GmbH • Potsdamer Strafie 12-13 • 14163 Berlin • Germany

article number general tolerance ISO 2768-mK, if not indicated otherwise 121 for more details on sensor type please refer to ..Corresponding Sensing Heads for Incremental Rotary Scales" section on last page of this document BOGEN Magnetics GmbH • Potsdamer Strafie 12-13 • 14163 Berlin • Germany

article number general tolerance ISO 2768-mK, if not indicated otherwise 121 for more details on sensor type please refer to ..Corresponding Sensing Heads for Incremental Rotary Scales" section on last page of this document BOGEN Magnetics GmbH • Potsdamer StraRe 12-13 • 14163 Berlin • Germany

article number general tolerance ISO 2768-mK, if not indicated otherwise 121 for more details on sensor type please refer to ..Corresponding Absolute Sensing Heads for Nonius Rotary Scales" section on the last page of this document BOGEN Magnetics GmbH • Potsdamer Strafie 12-13 • 14163 Berlin • Germany

article number general tolerance ISO 2768-mK, if not indicated otherwise 121 for more details on sensor type please refer to ..Corresponding Sensing Heads for Incremental Rotary Scales" section on last page of this document BOGEN Magnetics GmbH • Potsdamer Strafie 12-13 • 14163 Berlin • Germany

Environmental Specification (Elastomer-Bonded Ferrite/Isotropic) Magnetic Properties Physical Properties tensile strength N/mm2 (MPa| Chemical Properties - not suitable + good ++ very godd Environmental Specifications (Hard Ferrite) Magnetic Properties Physical Properties Chemical Properties

sensor type (1) full order code AKS16-O-P-C: Rotary Scale Radial near S P pole pitch see scale ordering example AKS16-O1-P1.28-C1: • AKS16 Magnetic Sensing Head • orientation option parallel (2) W2B as standard connector; choose C1 for FFC connector (3) choose IKS9.1-[...] / IKS15.1-[...] respectively for metal case instead of plastic case Please see full datasheets by clicking on the sensor type in the table above.BOGEN Magnetics GmbH • Potsdamer Strafie 12-13 • 14163 Berlin • GermanyFon +49 (0) 30 81 00 02 - 0 • Fax +49 (0) 30 81 00 02 - 60 • [email protected] • www.bogen-magnetics.com...