DIN X5CrNiMo17-12-2 | WNr. 1.4401 | AISI 316 | TYPE 316 | UNS S31600 DIN X2CrNiMo17-12-2 | WNr. 1.4404 | AISI 316/316L | TYPE 316/316L | UNS S31603
1Pages
Catalog excerpts
TECHNICAL SHEET DIN X5CrNiMo17-12-2 | WNr. 1.4401 | AISI 316 | TYPE 316 | UNS S31600 DIN X2CrNiMo17-12-2 | WNr. 1.4404 | AISI 316/316L | TYPE 316/316L | UNS S31603 AUSTENITIC STAINLESS STEEL PRESSURE VESSELS, COSMETIC INDUSTRY, FOOD/PETFOOD INDUSTRY, PHARMACEUTICALS INDUSTRY, BIOMEDICAL IMPLANTS, MARINE EXTERIOR TRIM, TEXTILE FINISHING DELIVERY CONDITIONS Hot rolled, annealed and pickled condition or cold drawn condition FLAT / SQUARE / HEXAGONAL BARS SIZE TOLERANCE Mechanical Properties Condition Cold drawn* *maximum and minimum values may change upon requested thickness and strain-hardened level Yield Strength / Streckgrenze / Tensão Limite 1% point / Dehngrenze / Limite de Extensão Tensile strength / Zugfestigkeit / Tensão de Rotura Elongation / Bruchdehnung / Alongamento Reduction of area / Einschnürung / Coeficiente de Estricção Other delivery requirements may be analysed upon request The contents on this form are Böllinghaus property THE DATA CONTAINED HEREIN ARE INTENDED AS REFERENCE ONLY AND MAY BE REVISED AT ANY TIME WITHOUT PRIOR NOTICE. BÖLLINGHAUS STEEL SA DISCLAIMS ALL RESPONSABILITY FOR ANY CONSEQUENCES THAT MAY RESULT FROM THIS TECHNICAL SHEET USE.
Open the catalog to page 1All Böllinghaus Steel GmbH catalogs and technical brochures
-
Polished Material
2 Pages
-
Compression bars
2 Pages
-
Taper bars
2 Pages
-
Custom-made Special Profile
2 Pages
-
New Product Range_mm
1 Pages
-
New Product Range_Inch
1 Pages
-
1.4301 | 1.4307
1 Pages
-
X15CrNiSi25-21 (WNr. 1.4841)
1 Pages
-
X15CrNiSi20-12 (WNr. 1.4828)
1 Pages
-
| WNr. 1.4462
1 Pages
-
X14CrMoS17 (WNr. 1.4104)
1 Pages
-
X14CrMoS17 (WNr. 1.4104)
1 Pages
-
X17CrNi16-2 (WNr. 1.4057)
1 Pages
-
X20Cr13 (WNr. 1.4021)
1 Pages
-
X20Cr13 (WNr. 1.4021)
1 Pages