Website:
Böllinghaus Steel GmbH
Catalog excerpts
TECHNICAL SHEET DIN X5CrNi18-10 | WNr. 1.4301 | AISI 304 | TYPE 304 | UNS S30400 DIN X2CrNi18-9 | WNr. 1.4307 | AISI 304/304L | TYPE 304/304L | UNS S30403 AUSTENITIC STAINLESS STEEL CUTLERY, FOOD INDUSTRY, FRAMES, NUCLEAR VESSELS, SPRINGS, BOLTS AND SCREWS, CHEMICAL EQUIPMENT, CRYOGENIC VESSELS , EVAPORATORS, PAPER INDUSTRY, FITTINGS DELIVERY CONDITIONS Hot rolled, annealed and pickled condition or cold drawn condition FLAT / SQUARE / HEXAGONAL BARS SIZE TOLERANCE Mechanical Properties Condition Cold drawn* *maximum and minimum values may change upon requested thickness and strain-hardened level Yield Strength / Streckgrenze / Tensão Limite 1% point / Dehngrenze / Limite de Extensão Tensile strength / Zugfestigkeit / Tensão de Rotura Elongation / Bruchdehnung / Alongamento Reduction of area / Einschnürung / Coeficiente de Estricção Other delivery requirements may be analysed upon request The contents on this form are Böllinghaus property THE DATA CONTAINED HEREIN ARE INTENDED AS REFERENCE ONLY AND MAY BE REVISED AT ANY TIME WITHOUT PRIOR NOTICE. BÖLLINGHAUS STEEL SA DISCLAIMS ALL RESPONSABILITY FOR ANY CONSEQUENCES THAT MAY RESULT FROM THIS TECHNICAL SHEET USE.
Open the catalog to page 1All Böllinghaus Steel GmbH catalogs and technical brochures
-
Polished Material2 Pages
-
Compression bars2 Pages
-
Taper bars2 Pages
-
Custom-made Special Profile2 Pages
-
New Product Range_mm1 Pages
-
New Product Range_Inch1 Pages
-
X15CrNiSi25-21 (WNr. 1.4841)1 Pages
-
X15CrNiSi20-12 (WNr. 1.4828)1 Pages
-
| WNr. 1.44621 Pages
-
X14CrMoS17 (WNr. 1.4104)1 Pages
-
X14CrMoS17 (WNr. 1.4104)1 Pages
-
X17CrNi16-2 (WNr. 1.4057)1 Pages
-
X20Cr13 (WNr. 1.4021)1 Pages
-
X20Cr13 (WNr. 1.4021)1 Pages
