ODORIZING NOZZLE EXCHANGE VALVE THE BALL VALVE WITH AN EYE FOR DETAIL

REDUCES INSPECTION COSTS CREATES SAFETY AT A GLANCE!

HAVE YOU GOT YOUR EYE ON YOUR INJECTION NOZZLES? The DVGW (German Technical and Scientific Association for Gas and Water) recommends: Check your injection nozzles regularly to ensure fault-free odorization! During odorization, secondary gas substances and dust form deposits on the vaporization bodies of injection nozzles. In the course of time, the odour substances and deposits form a sticky substance on the surface of the injection nozzle. The vaporization surfaces of the injection nozzles are minimized and the odour substance can no longer be fully vaporized. Over time, the injection nozzles...

ODORIZING NOZZLE EXCHANGE VALVE FOCUSSED ON EFFICIENCY The odorization nozzle exchange valve (OEV) was developed jointly by Innogy and Böhmer in order to simplify injection nozzle maintenance and service. EV SAVES TIME AND MONEY INSPECTION WITHOUT REMOVAL EASY TO EXCHANGE ALTERNATIVE SUPPLY UNNECESSARY Unlike the classical method of installation in the pipeline, with the OEV the injection nozzle is installed directly into the ball valve. To service the injection nozzle, the valve is shut off and its interior chamber depressurized. The gas flow is fed on via a by-pass pipeline. ONLY REQUIRES ONE...

E-Mail: [email protected]