temp 300
8Pages

A THERMAL CARE COMPANY Temperature Controller

Temp 300 works with oil as the circulating medium in the temperature range from 30 to 200°C or from 30 to 300°C. The desired temperature range must be indicated when placing the order. Temp 300 is available with heating capacities from 6 to 36 kW as standard. Temp 300 is heavily insulated against thermal loss and the insulation of the tank is not affected by any oil overflow. The low temperature in the expansion tank ensures an extended oil life. The pump is submerged direct- ly into the oil tank and the pump construction without rotating shaft seal ensures a nonleaking pump. The oil level...

Tank volume: Heating capacity: Cooling capacity at ∆t = 60 °C: Hose connections, oil: Hose connections, water: Pump motor capacity: Temperature range: Circulating medium: Pump capacity, max.: Pump pressure, max.: Suction capacity max.:

Pump capacity curve bar 5 4 Cooling capacity curve Δ t = Tank temperature less cooling water temperature

From mould To mould Inlet, cooling water Outlet, cooling water Pump Tank Level switch Temperature sensor Microprocessor control Heat exchanger Heating element Overflow Expansion tank Solenoid valve, cooling Connection, remote sensor (option) Filling Check valve Adjusting valve (vac) Injector (vac) Drain (vac)

A blend of people and possibilities One degree better - and a lot more...

ONE DEGREE BETTER - AND A LOT MORE... BOE THERM A/S · Industrivaenget 1 · DK-5610 Assens · Phone +45 6471 2375 Fax +45 6471 2303 · info@boe-therm.dk · www.boe-therm.dk