Plastic belts
3Pages

TECHNICAL FEATURES • NON-REMOVABLE side panels, H=40 mm • Mounted on castors with brake 0100mm • MB patented plastic belt, standard version with slats h=35mm, modular, standard pitch 400mm (min. pitch 25mm). • The containment side edge does not open even during the rotation of the belt on the drive sprockets. The contact surface of the is slightly high grip. • Temperature resistance: from +1°C to about 130°C. • Standard transmission group consisting of 0.18 kW three-phase, asynchronous motor coupled with worm reduction unit with permanent lubrication. For safety reasons, the geared motor assembly is always equipped with a safety limiter. • Fixed standard speed: 5 mt/min • Start/Stop switch/motor cut-out, with 5 m cable and 5P CE plug (3 phases+ground). • Voltage: 400V / 50Hz Boe-Therm A/S • Industrivrenget 1 • DK 5610 Assens • Tel.: +45 6471 2375 www.boe-therm.dk • info@bo

CPT TP TECHNICAL FEATURES • NON-REMOVABLE side panels, H=40 mm • Mounted on castors with brake 0100mm • MB patented plastic belt, standard version with slats h=35mm, modular, standard pitch 400mm (min. pitch 25mm). • The containment side edge does not open even during the rotation of the belt on the drive sprockets. The contact surface of the is slightly high grip. • Temperature resistance: from +1°C to about 130°C. • Standard transmission group consisting of 0.18 kW three-phase, asynchronous motor coupled with worm reduction unit with permanent lubrication. For safety reasons, the geared...

PA TP TECHNICAL FEATURES • NON-REMOVABLE side panels, H=40 mm • Mounted on castors with brake 0100mm • MB patented plastic belt, standard version without slats (possible std slats: h=35 mm modular, min. pitch 25 mm). The containment side edge does not open even during the rotation of the slat belt on the drive sprockets. The contact surface of the is slightly high grip. • Temperature resistance: from +1°C to about 130°C. • Standard transmission group consisting of three-phase, asynchronous motor coupled with worm reduction unit with permanent lubrication. For safety reasons, the geared...