Type UPM - Unfiltered DC Motor Speed Controls
2Pages

Type UPM Unfiltered DC Motor Speed Controls The UPM unfiltered control draws lower AC line current than comparable SCR filtered controls. DIP switches allow the control to be easily calibrated for different size motors. Controls are available with either ¼” quick connect tabs or a plug-in terminal block. • nput Voltage: Chassis model operates from either 115 VAC or 230 VAC I line, selectable with plug-in jumper; the enclosed model features a factoryinstalled 115 Volt AC line • Output Voltage: 0-90 VDC; 0-180 VDC • Form Factor: 1.6 S • witchable Output: for 0-90 VDC or 0-180 VDC (chassis models only) • ack EMF Feedback: maintains better than 2% speed regulation B Chassis Type • wo Diagnostic LEDs: indicate when power is on and when current T (1/4” quick connect tabs shown) output is at limit set by TORQ pot (chassis models only) • ser-Adjustable Pots: for torque limit, minimum speed limit, maxiU mum speed limit, acceleration time, deceleration time and speed regulation I • nhibit Function: connections for optional user-supplied inhibit switch available • peed Adjustment: 10 kΩ single turn speed pot (supplied with S chassis type controls); speed can also be adjusted via isolated 0-5 VDC remote signal (optional isolation card required) O • ptional Model 3984 Isolation Card: provides 4-20ma interface, a grounded circuit reference, and signal for multiple controls; sold separately RoHS COMPLIANT Typical Applications Ideal for use in single direction applications such as: industrial conveyors, packaging machines, screen printing equipment, conveyor ovens (food processing applications), medical devices, lab instrumentation and labeling equipment. HP Continuous Output Peak Output Rating Current (Amps) Current (Amps) 1/3@180 V 2.1 4.2 1/5@90 V 2.1 4.2 1/5 Product Type UPM-3318C (Chassis) UPM-3318C (Chassis) UPM-3318E1 (Enclosed) Model Number 1/4”QC Terminal Block Connect Connect 0865 0866 0865 0866 — 201 Northfield Road | Northfield, IL 60093 U.S.A. | 800.7BODINE | Outside U.S.A. +001.773.478.3515 | Fax: 773.478.3232 | www.bodine-electric.com | info@bodine-electric.com P/N 074 81085.rev.B

UPM Connection Diagram (Chassis) 1.50 Optional Inhibit Switch (supplied by user) 10K Speed Potentiometer (included with control) Fuse * (supplied by user) Fuse (supplied by user) 115 VAC or 230 VAC Line Voltage Motor Armature All wires external to control must be supplied by user * This fuse should only be used when L2 is not neutral (such as for 230 VAC operation in USA) User can connect an optional inhibit switch here S1 (BLUE) S2 (ORANGE) S3 (YELLOW) DC motor speed control C Factory-wired to speed pot on front panel Factory-wired to on/off power switch User connects motor here. CW...