New Hollow-Shaft Hypoid PMDC GearmotorsLow Voltage 12VDC and 24VDC The new type 33A7-25H2 and 33A7-30H3 hypoid gearmotor combines our high-performance 33A PMDC motor with our all new hypoid gearheads. The gearmotor's high torque and efficient performance make it an ideal drive for battery or solar-powered gates, industrial conveyor systems, AGVs, mobile industrial equipment, or food-processing equipment. All-New Type 25H2 and 30H3 Hypoid Gearhead • More energy-efficient than similar worm-gear models • Hollow shaft eliminates expensive shaft couplings, and mounting hardware • Unvented gearhousing mounts in any orientation • Permanently lubricated with high-performance lubricant • Hardened steel gears for long life and maximum performance 33A Motor Features Totally enclosed non-ventilated High starting torque Class "F" insulation and ratings. Pre-seated motor brushes for optimum performance and quiet operation Permanently lubricated, noise-tested, sealed, ball bearings Encoder-compatible with new optional screw-in encoder shaft kit (standard/stock models supplied with factory-installed cover over shaft opening). cTOus |RoHS Ideal for applications that require higher torque and lower power consumption than gearheads utilizing worm gears can provide: conveyors, pumps, packaging and other industrial automation equipment. Gearmotor Specifications and Ratings Ratings are based on operation from DC power. Performance may vary with a speed control. www.bodine-electric.com | [email protected] | 201 Northfield Road | Northfield, Illinois, 60093, U.S.A. | Tel: 773.478.3515

33A7-30H3 PMDC Hypoid Gearmotor (12VDC and 24VDC) Dimensions (inches) 1.81 .2500 4.58±.05 1.81 2.29 Factory installed accessory shaft cover Hollow shaft bore diameter: 1.2513/1.2500 33A7-25H2 PMDC Hypoid Gearmotor 1.71 4.22±.04 2.11 Factory installed accessory shaft cover 4xM8x1-6H .94 deep equally spaced on ø3.35 B.C. this side only Hollow shaft bore diameter: 1.0013/1.0000 Hypoid Gearmotor Accessories Bodine’s optional hypoid gearmotor accessories include shaft kits for both the 25H2 and 30H3 gearheads, shaft cover kits (non-extension side), base/foot mount brackets for both gearheads, and...