1. Catalogs
  2. BODET TIME SPORT
  3. WIRELESS RELAY CONTROLLER

WIRELESS RELAY CONTROLLER

WIRELESS RELAY CONTROLLER

Product catalog summary
Description: The wireless relay controllers receive data from a master clock via DHF radio signals and are used to activate systems such as bells, heaters, air conditioning, lighting, alarms, and access control. The indoor version can be mounted directly on a DIN rail.
Norms: The product complies with several standards: Radio (EN 300-220-3), EMC (EN 301-489-3), Safety (EN 60950), and DHF (NFS 87500-C).
General Features: The controllers are identified using DIP switches numbered from 1 to 16. They include DIP switches for relay testing and initialization, and relay testing can be conducted from either the master clock or the wireless relay controller.
Mechanical and Electrical Features: The controllers have a protection index of IP 41, operate within a temperature range of -20 to +70°C, and require a power supply of 240V ±10% at 50/60Hz. The relay rating is 1A / 240V, and they operate at a radio frequency of 869MHz. The DHF signal range is between 100 to 200 meters, depending on the environment.
References and Installation Examples: The document lists different models such as the 1-relay indoor controller (907 523), 1-relay outdoor controller (907 524), and 1-relay wall embedded controller (907 525). Installation examples include connections to systems like chimes, access control, and heaters, all operating at 240V.
See more

Catalog excerpts

WIRELESS RELAY CONTROLLER-1

WIRELESS RELAY CONTROLLER DESCRIPTION Outdoor Wall embedded • Those controllers receive data from a master clock by DHF radio signal and drive relays. • For the activation of bells and other systems such as heater, air conditioning, lighting, alarms, access control, etc… • Indoor version can be directly fixed on a DIN rail. NORMS • RADIO : EN 300-220-3. • EMC : EN 301-489-3. • Safety : EN 60950. • DHF : NFS 87500-C. See the product page >> www.bodet-time.com << GENERAL FEATURES • Identification by DIP switches from 1 to 16. • DIP switch for relay testing. • DIP switch for initialization. • Relay testing from master clock or from the wireless relay controller. EXAMPLE OF INSTALLATION Chime Access control Non contractual document. © 2015, Bodet SA. All rights reserve

 Open the catalog to page 1

All BODET TIME SPORT catalogs and technical brochures

  1. Time Server

    8  Pages

  2. Time Management

    20  Pages

Archived catalogs

  1. DCF-antenna

    1  Page

  2. GPS ANTENNA

    1  Page

  3. FI ANTENNA

    1  Page

  4. Harmonys

    4  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.