Service and repair work should only be done by qualifi ed service personnel.If lift arms are raised for service, they must be secured by an approved lift arm support device. Never smoke when fueling! Know the location and function of all safety features and inter- locks, gauges and operating controls. Activate the auxiliary hydraulics control lever for hydraulic attachment operation. The Service Schedule under the engine cover provides service and maintenance instructions. Check fl uid levels, lubricate and grease loader as required. Check for leaks, broken or damaged parts before operating. > Always drive up the ramp with heavy end uphill . Engage parking brake.Secure loader and attachments using tie-downs and chains. Use towing vehicle and trailer of adequate capacity. > Additional machine options and accessories are available such as a ride on platform. Wear proper clothing and use personal protection equipment as required for the job. > Make sure all controls are in NEUTRAL before starting the engine.The engine will not start if the steering lever controls, lift or auxiliary hydraulic controls are engaged. > This brochure is also available in Spanish. Bobcat Company P.O. Box 6000 Օ West Fargo, ND 58078 www.bobcat.com Printed in U.S.A. B-1765 Kn-15M-1004-#653104-F size="-3">

Before leaving the operators position: 1 Lower lift arms and put attachment fl at on the ground. 2 Put all controls in NEUTRAL. 3 Engage the parking brake. 4 Stop the engine. 5 Remove the key to prevent unauthorized starting. > Never exceed loaderҒs Rated Operating Capacity (ROC).Use the correct size bucket for the type and density of material being handled.Always look in the direction of travel. Understand and comply with applicable laws and regulations. Օ Call local utilities before you dig: 1-888-258-0808 . Know the location of underground gas, water and electrical lines. Inspect work area...