Safety rules for Bobcat loader backhoes Օ Know the equipment and the worksite before you operate. Remember: safe operation begins with the operator. Service and repair work should only be done by qualifi ed service personnel.If lift arms are raised for service, they must be secured by an approved lift arm support device. Always drive up the ramp with heavy end uphill. Engage parking brake.Secure loader backhoe and attachments using tie-downs and chains. Use towing vehicle and trailer of adequate capacity. Printed in U.S.A. Kn-10M-1004-#653070-F Bobcat Company Servicing Transporting the Loader and Attachment Options and Accessories Additional machine options and accessories are available (i.e. beacon light kit). Always fasten seat belt snugly. P.O. Box 6000 Օ West Fargo, ND 58078 www.bobcat.com B-1790 The Service Schedule under the engine cover provides service and maintenance instructions. Check fl uid levels, lubricate and grease the machine as required. Check for leaks and broken or damaged parts before operating. Never smoke when fueling! Know the location and function of all safety features, gauges and operating controls. Before Operating Wear proper clothing and use personal protection equipment as required for the job. Failure to follow warnings or instructions can cause serious injury or death.The Operation and Maintenance Manual, OperatorՒs Handbook, Safety Manual and machine signs (decals) provide proper operation and maintenance instructions. >

Never exceed loader backhoes rated operating capacity (ROC).Use the correct size bucket for the type and density of material being handled.Always look in the direction of travel. Keep bystanders away from the work area. Never carry riders or use loader as a manlift. On slopes, keep heavyend of loader backhoe uphill.Travel directly up and down slopes, not across them. Never operate loader backhoeҒs controls from the ground. Always sit in the operators seat when activating the controls.Keep the bucket level when raising lift arms to prevent material from falling out of bucket. Make sure all controls...