CAD/CAM SOFTWARE - MILL TURN CAD|MILL|MILL TURN|LATHE|ROUTER|PLASMA|LASER|WATERJET|WIRE FEWER STEPS | BETTER CUTS | MORE PROFIT

EXPERIENCE THE POWER OF THE NEW BobCAD-CAM™ THE PRECISION OF MILL TURN KEY FEATURES OF MILL TURN The BobCAD-CAM Mill Turn module combines all the power and functionality of CAD-CAM for both mill and lathe in a single streamlined programming software for live tooling/multitask machining environments. It’s a high performance and easy to use, yet affordable CAD-CAM solution for the growing market of mill turn machine shops. 2 Axis Turning & Live C Axis (XZC) C axis milling supports positioning and contouring motion on the outside diameter and face of the part. This can be used with indexing, wrapping...

MDI Programming MDI programming allows you to set up the sequence of actions that are executed before tool changes, after tool changes, or after an operation is completed. Using tasks, lines, and commands, you can create, save, and load custom program blocks that coordinate events that happen within your mill turn machine like tail stock positioning, steady rest positioning, part transfers, and much more. The sequence can be defined using a task list with an unlimited number of lines using customizable commands. CAM • Tool Crib • Stock Wizards • Multiple Machine Setups • Material Library • Material...

The Features You Want. The Training You Need. The Support You Deserve. KEY FEATURES OF MILL TURN (continued) Mill Turn Machine Configuration & Simulation Mill Turn Machines & Submachines Definitions | Multi-Turret & Multi-Spindle Support | Programmable Tailstock, Steady Rest, & More The full machine simulation for mill turn utilizes your machine’s kinematics and configuration including all spindles, turrets, tools, tool adapters, milling heads, tailstocks, and steady rests to test out your programming for any collisions or errors. The simulation displays your full machine with dynamic viewing...

Available Toolpaths TURNING TOOLPATHS • OD/ID Rouging • OD/ID Finishing • OD/ID Grooving • Drilling • Threading • Cut Off with Chamfer & Fillet Corner Break Options • Stock Feed • Pattern Repeat Cycles • Auto-Assignment of Finish Passes MILLING TOOLPATHS 2.5 Axis • Profiling • Pocketing • Engraving • High Speed Pocketing • Thread Milling • Plunge Roughing • Facing • Chamfering • Rest Machining Surfaced Based Toolpaths (3, 4, & 5 Axis Output) • Parallel Cuts • Cuts Along Curve • Morph Between 2 Curves • Parallel to Multiple Curves • Project Curves • Morph Between 2 Surfaces • Parallel to Surface...

Create precise 2 & 4 axis wirepath CNC programming quickly and easily with CAD-CAM for Wire EDM. This powerful software allows you to set up open & closed, inside & outside shape programming and gives you the ability to customize skim passes, independent lead-ins/ lead-outs, glue stops, and more for a complete wire EDM programming solution that works with Mitsubishi, Japax, Brother, Fanuc, Sodick and other CNC Wire EDM machines. Customizable Cutting Condition 2 & 4 Axis Inside, Outside, & Open Shape Cutting Options For Skim Passes, Independent Lead-In/Lead-Out & Glue Stops Apply Land & Taper...

BobCAD-CAM, Inc. As a worldwide leader in developing innovative solutions for CNC part programming, BobCAD-CAM remains at the forefront in providing both small and large shops with powerful and affordable CAD-CAM products. BobCAD-CAM software delivers cutting-edge CAD-CAM technology for shops looking for an efficient solution in toolpath and g-code programming. SYSTEM REQUIREMENTS Windows (Minimum) • 3GB RAM • 128 MB Graphics Card* • Intel® or AMD® Processors** • 2GHz Processor • Windows Vista, Windows 7, or Windows 8 • IE9 or Above • When using physical media (disk) to install the BobCAD-CAM...