D130/D100 SERIES Baling press constructed with prepress flaps, automatic binding system and hydraulic counter press channel for fully automatic bale production. The prepress flaps in the filling opening of the press close simultaneously, resulting in a closed press channel. Because of this, optimal-weight homogeneous bales are produced without cutting being necessary. These flaps have been constructed in such a way that any impacting forces are effectively absorbed. The front flap is smaller in view of the distribution of forces, and is equipped with a knife so that material between the flaps can be cut. The rear flap is equipped with a fallback mechanism and anti-blockage switch, which minimizes interventions. Because of this, materials that are difficult to press can be processed as well. The press ram is equipped with a knife for the treatment of very expansive materials. Consequently, the press is extremely suitable to handle paper, cardboard, varied material, various plastics and other recyclables. When constructed with a “Refuse” ram, the baler is also capable of compressing domestic waste, wood, straw, hay and textiles. Moreover, several control possibilities provide optimal pressing results with heavy, well-shaped and stackable bales

IMPRESS D 130 IMPRESS D 130 IMPRESS D 100 IMPRESS D 100 A.5V.I.6 B.5V.1.6 A.5V.1.6 B.5V.1.6 Hydraulic power unit 150 110 kW Capacity Dependant on material, input and bale weight. Material weight