Affordable and Reliable Lip Rolling Equipment Brown Machine Model LR-5 Lip Roller is an entry-level, single screw machine designed to roll or curl lips on round, thermoplastic containers at the rate of 500 to 2000 units per minute. A customized Brown Transfer Conveyor can feed containers by hand or automatically. Product specific screw and cages permit the Model LR-5 Lip Roller to handle containers from a 2” (51 mm) minimum diameter to a 5” (127 mm) maximum diameter and accommodate different stacking heights. Safety Features • • • • • Guards. Designed to provide high visibility and easy access for operator safety. Safety Tags. Bilingual with pictographic tags are standard. Flanged disconnect on electrical enclosure. Main electrical disconnect with padlock. Stop Buttons. Large red palm stop buttons are standard. When depressed, they lock in the off position and must be pulled and rotated back into a reset position. Nested stacks of containers are fed horizontally into the Model LR-5 Lip Roller and are conveyed through the unit without denesting. The crowd roller assembly moves the stack of product through the oven section into the screw and cage assembly. The heating section preheats the containers utilizing a PID control system. An optional temperature control unity can by used to control the temperature of the water pumped through the cored curling screw. A curling screw rolls the lip of the containers, which are then discharged into a horizontal trough. The Screw is manually adjustable up and down and in the angled direction via a micro adjustment with reference point. The cage is driven via a flat belt which wraps around the screw and cage. A variable speed drive permits the unit to be synchronized with various feed sources such a Brown Machine Trim Press. The standard Brown Machine Model LR-5 is designed for a 6” (152 mm) screw length. Ceramic Oven Temperature Control Unit Casters on the Mainframe Curling Screw and Cage (Not Included with Machine) International Voltages UL, CE, CSA, & HSE Approvals Available Spare Parts Packages Start-Up and Tryout Capabilities