Single Station LR-1 Lip Roller A single station lip roller designed for prototype lip rolling applications. The LR-1 lip rolling process is initiated by positioning a round container on a mandrel and then activating the start sequence. The container begins spinning and a heater arm is moved inward to a pre-set position to heat the lip of the container. At the completion of the heat cycle the heater arm is retracted and the roller arm with mandrel is set in motion to roll the lip of the product. Electrical, pneumatic and mechanical functions are controlled by timers and stops to achieve a repeatable process. Each mandrel is designed specific to the containers internal mouth dimensions to provide optimum fit and rotation during the lip rolling stage. The LR-1 is a cost effective lab environment machine that allows evaluation and testing of lip rolled containers prior to the investment of multicavity tooling and production lip rolling screws.

Need Productivity? Retrofits Kits or Remanufacture In addition to the LR-1 Lip Roller, Brown Machine offers a wide array of retrofit kits to upgrade your current equipment. Like other capital equipment, your thermoforming machinery eventually becomes technically outdated or inefficient. Adding a retrofit kit can provide features and options that were not available on your original machine. Retrofit kits can provide improve- ments in speed, reliability, safety, productivity or ease of control. If your equipment requires significant upgrades or your machine condition has deteriorated, Brown offers...