MCANCAN Interface Module for PCI-BASEII, PCIe-BASE Assemble Measurement Card. Measure. Via CAN. For optimum customization to a measurement application, the PCI/PCIe cards from BMC Messsysteme GmbH can be supplemented with various modules. Measurements via the CAN interface can be realized with the MCAN module. Analog-CAN Combination. Synchronous. If using both a MADDA and an MCAN module together on the PCI-/PCIe card, analog and CAN data are sampled synchronously in time. Those Who Can, CAN. The CAN technology (Controller Area Network) features high interference resistance, low costs, and real time capability. CAN is preferred especially in industry and in the automotive sector. 2 Channels. 1 Mbit. The MCAN module features two measuring channels CAN1 and CAN2. They are available at the 37-pin D-Sub female connector of the PCI/PCIe card. Transmission rates of up to 1 Mbit can be reached. Modularity. Individuality. Flexibility. Besides the MCAN module, a great variety of analog input and output modules is available to equip the PCI/PCIe base board for a measurement application. The combination of the modules in the two card slots creates individual solutions. Windows®. That's it. The MCAN can be used on Windows® XP/7/8/10. The driver to install the module is included. NextView®4. Try for Free. The CAN module is supported by NextView® 4, the software for data acquisition and analysis. A fully functional 30-day trial can be downloaded for free at www.bmcm.de/us to directly test the functionality of the MCAN. bavarian measurement company munich

1 Installation on the PCI-BASEII, PCIe-BASE The MCAN module can be integrated on any slot of the PCI-BASEII, PCIe-BASE or older versions. Make sure the plugs and sockets fit together exactly. The channels of the module on slot M2 can be accessed at the internal pin connectors K3, K4 of the DAQ card. They can be led out of the PC to a slot bracket with D-Sub 37 female using the optional ZUKA16 connection cable (connect channel 1 - colored line - of ZUKA16 with pin 1 of the pin connector K3 - square pad -and attach 2. connector in parallel). Available as accessory is the connector cable ZUKA-CAN...

3 Termination Closing solder jumpers PL7 for channel 1 and PL10 for channel 2 turns on the termination for the respective channel (make settings on the "component-free" side). 4 Pin Assignment of the MCAN Modules with the PCI/PCIe Card The following table shows which pins are used for the connection of the CAN channels. The channels of the module on the first slot are accessible at the 37-pin D-Sub female of the DAQ card. The connections of the module on slot 2 can be led through to an additional 37-pin D-Sub female by means of the add-on cable ZUKA16. If using the add-on ZUKA-CAN, the connections...

6 Important Notes for Using the MCAN • The modules are only suitable for extra-low voltages - please observe the relevant regulations! The modules must only be used in closed PC housings (for reasons relating to EMC). • All accessible pins are electrostatic sensitive devices. Provide for a grounded conductive work place. • Only use non-solvent detergents for cleaning. The product is designed to be maintenance-free. • The product must not be used for safety-relevant tasks. With the use of the product, the customer becomes manufacturer by law and is therefore fully responsible for the proper installation...