Multipoint Gauging Machines for shafts and axles

Product catalog summary

Overview: The document describes multipoint gauging machines designed for measuring shafts and axles in production environments. These machines are suitable for both low and high-volume production and are capable of measuring various geometric parameters such as length, diameter, roundness, cylindricity, and concentricity.

Key Features:

Universal tactile measuring system for rotationally symmetric workpieces like tubes, drive shafts, gear shafts, or camshafts.
Modular design allows for a variety of measuring tasks with freely positionable measuring forks/callipers.
Manual and automatic loading options with easy access to the loading position.
Post-process multipoint measuring system with an independent PLC for easy integration into existing automation systems.
Short, optimized feed motions and high availability due to reduced changeover time.
Automatic calibration device and optional correction interface.

Technical Specifications:

Standard dimensions: H = 1400 mm, D = 900 mm, W = 1600 mm.
Workpiece length up to 800 mm and diameter up to 120 mm.
Workpiece support between precision centers with central lubrication system.
Sensor system is tactile with static, dynamic, or combined measuring procedures.
Rotary actuator for workpiece rotation and control via panel PC with measurement/evaluation software.
Temperature range from 0 °C to +45 °C and weight approximately 500 kg.

Benefits:

Fast acquisition of workpiece geometry with high accuracy due to high-quality sensors.
Flexibly configurable measuring unit with intelligent universal clamping system.
Additional changeover monitoring using the poka-yoke principle.

Service and Support: Blum-Novotest offers worldwide service and support through more than 40 subsidiaries and service offices.

Catalog excerpts

Multipoint Gauging Machines for shafts and axles-1

Multipoint Gauging Machines for shafts and axles Workpiece Measurement Modular System Post-Process Measuring Technology Diameter Measurement Length Measurement Roundness Measurement Cylindricity Measurement Concentricity Measurement Multipoint Gauging Machines for shafts and axles

Open the catalog to page 1

Multipoint Gauging Machines for shafts and axles-2

Multipoint Gauging Machines for shafts and axles Universal tactile measuring system for axle and shaft measurement in production environment The multipoint measuring machines provide fast acquisition of the geometry by dynamic measurement of diameter, concentricity and run-out for rotationally symmetric workpieces such as tubes, drive shafts, gear shafts or camshafts. A wide variety of measuring tasks can be performed due to the modular design with freely positionable measuring forks/callipers. Loading is possible manually as well as automatically. Its loading position is easy accessible from...

Open the catalog to page 2

Multipoint Gauging Machines for shafts and axles

Multipoint Gauging Machines for shafts and axles

Catalog excerpts

All Blum-Novotest catalogs and technical brochures