PowerWalker VFIMPSeries • Online technology with Power Factor 0.9 • Supports up to 10 hot-swappable 15kVA UPS modules • N+X parallel redundant configuration which leaves no Single Point of Failure • 7" full colour touch screen • Configurable battery quantity from 32 to 40 pieces per string • Optimized performance with >93% efficiency Modular on-line UPS allows selecting desired power rating in range of 15kVA to 150kVA (up to 10 modules of 15kVA). Modules are working in parallel without any need for extra cabling, synchronisation or setup. Additionally, modules are hot-swappable, which means you can insert another module even when UPS is fully energized and working. There are three types of cabinets rated to 90kVA, 120kVA and 150kVA (different cabling, MBS rating etc), all of them are the same size and can fit 10 modules, so for example 90kVA cabinet with 10 modules will work in parallel 6+4 system. Six modules (6x15kVA=90kVA rated) are enough to support the load and additional four are serving as redundant backup. If any module fails, you can easily unplug it and replace without interruption for the operation. The cabinets can be bottom or top wired and they support dual input. TECHNICAL SPECIFICATION BlueWalker GmbH | Hellersbergstrasse 6, 41460 Neuss, Germany | Tel.: +49 2131 206 17 59

(£)PowerMfa/Arer PowerWalker VFI MP 3/3 belongs to advanced models, featuring all benefits of modern UPSs like high power factor 0.9, zero transfer time, three additional intelligent slots for extension cards, pure sine wave output with <2% THD with linear load. External battery input is flexible allowing selecting from 32 to 40 batteries per set, which you can change with 7" full colour LCD panel. This series is the best for redundant backup management, system with N+2 modules inserted increases availability of the UPS system over 99.99% and its MTBF (Mean Time Between Fails) over 10mln hours!...