FSIDS Lift Table Series mUr riniui hydraulic work positioners Mtjg, £ 0m MMMmMmm m % Work Smart - Not Hard with a Blue Giant Lift Table Common Structural & Design Features Every Blue Giant Lift Table is manufactured to the highest ANSI standards and designed with dedicated attention to operator ■ UL/CSA approved motor and electrical components. ■ Velocity fuses on each cylinder to prevent platform free-fall for added operator safety. ■ Remote power pack is factory tested and prewired complete with NEMA standard hand held push button control. ■ All blue giant Lift Tables have scissor legs made of solid plate steel for maximum rigidity. ■ Reliable Blue giant lift cylinders provide years of trouble free operation. A hard chrome ram and self adjusting polyurethane seals assure long life and reduced maintenance. ■ Pivot points are fitted with life-time lubricated bearings or teflon coated bushings to ensure smooth, maintenance free operation. ■ Hard chromed pivot pins are further evidence of the quality built into each lift table. ■ Heavy duty torque tubes join the solid steel plate scissor legs assuring ultimate rigidity overfull range of travel. ■ Unique center ram thrust brackets designed to geometrically give best possible lifting capacity. ■ The smooth deck plate is heavily reinforced including the peripheral members that are welded as a one piece platform to meet/exceed rated capacities. ■ Electrical trip bar is mounted on all four sides of the table, stopping the downward travel of the unit upon contact with an obstruction. A recommended option for all open and pit installed units.

Work Safe Eliminate the need to bend, twist and pick up heavy loads manually. Let Blue Giant Lift Tables increase productivity and decrease costly injuries caused by overexertion and personal handling of materials. Did you know over 30% of all reported accidents are through manual handling of loads? The high costs of insurance and compensation resulting from back strain and employee injury further prohibit the personal handling of products in most industrial applications. A labor saving and efficient Blue Giant Lift Table can pay for itself in only a matter of months when used as a work station...

Standard Model Selection Chart nprif npeiRM STANDARD-.-.- CAPACITIES ( b)**---LOWERED VERTICAL RAISED DECK DESIGN DECKS|ZE g g g g g g g g g g g HEIGHT TRAVEL' HEIGHT Flush Deck & Frame tapered toe guard must Deck must be 8" wider and longer than frame Units with 12" or more lowered height, decks longer than frame CONSULT FACTORY 'Additional vertical travel available *AII models available with wider and longer decks up to next available size. All models available with smaller decks down to frame size ""Capacities are for evenly distributed loads. Single axle rolling load capacity is 80% of rated...

Application Form PRODUCT BEING HANDLED: LOAD DISTRIBUTION: □ Even □ Other_ HOW IS LIFT LOADED: □ Over □ End □ Side □ Raised □ Lowered HOW IS LIFT OFF LOADED: □ Over □ End □ Side □ Raised □ Lowered LIFT TABLE CAPACITY:_ PIT INSTALLED: □ Yes (toe protection required) □ No (floor mount) LOWERED HEIGHT (A):_RAISED HEIGHT (C):_ TOTAL TRAVEL (B):_ LIMIT SWITCH: □ Yes □ Up □ Down LIFT SPEED: □ With Load_□ Without Load_ OR TRAVEL TIME UP (SEC):_ DOWN (SEC):_ CYCLES:_□ Per hour □ Per Day □ Per Week □ Intermittent _ □ Remote Push Button □ Foot CONTROLS: □ NEMA Class POWER SOURCE: Voltage_ POWER PACK: □...