Catalogs >
Bloom Engineering >
1600 SERIES HIGH VELOCITY COLD AIR BAFFLE BURNER

1600 SERIES HIGH VELOCITY COLD AIR BAFFLE BURNER
4Pages

Catalog excerpts

1600 SERIES HIGH VELOCITY COLD AIR BAFFLE BURNER - 1

01/12 1600 SERIES HIGH VELOCITY COLD AIR BAFFLE BURNER CAPABILITIES Very low NOx emissions High momentum flame Designed for clean gaseous fuels At nominal the flame is clear with a blue core with increasing luminosity at turndown FEATURES Rugged fabricated construction Converging port for maximum momentum and reduced NOx Refractory baffle flame stabilization shields the burner internals from the flame’s and furnace’s radiation and is a self supporting structure Standard design is suitable for operation to 2600°F (1427°C) furnace temperature. Special construction is available for higher furnace temperatures Heat resistant alloy nozzle Internal or external air lance for increased turndown Provisions for flame monitoring Variety of pilot options available Uses volumetric or tandem valve air-fuel ratio APPLICATIONS Melters, Holders, Converters and Similar Furnaces Ladle Heating, Drying Plate Heat Treating BURNER IGNITION Pilot (Optional – See Bloom Representative) Direct Spark preferred FUEL CAPABILITIES Most Gases. FLAME MONITORING U.V. Detector CONTROL Metered Flow Cross Connected The Bloom 1600 Series refractory baffle burner is designed for clean gaseous fuels having a heating value of approximately 500 BTUs per cubic foot or greater. For designs using other gases or oil, contact your local Bloom representative or Bloom’s Pittsburgh office. CAUTION: The improper use of combustion equipment can result in a condition hazardous to people and property. Users are urged to comply with National Safety Standards and/or Insurance Underwriters recommendations © Bloom Engineering Co 2009 1

Open the catalog to page 1

1600 SERIES HIGH VELOCITY COLD AIR BAFFLE BURNER - 2

01/12 1600 SERIES HIGH VELOCITY COLD AIR BAFFLE BURNER Catalog No. 1600060 080 08X 100 120 140 160 Catalog No. 1600060-08X 100-160 Capacity MM Btu/hr KW (HHV) (HHV) at at 19 mBar 7.5” w.c. Air Air Pressure Pressure 4.0 1171 5.0 1464 7.3 2138 10.3 3016 13.5 3953 17.0 4978 21.0 6149 Air Flow (unlit) SCFH at 7.5” w.c. Nm3/hr at 19 mBar 54,720 68,400 99,864 140,904 184,680 232,560 287,280 1467 1834 2677 3778 4951 6235 7702 Pilot UV Connection Dimensions Direct Spark Pilot Coupling UV Coupling Igniter Pilot Size (npt) (npt) 3001-050 1” ¾” 3500-160 3001-100 1 ¼” ¾” NOTE: GENERAL DIMENSION...

Open the catalog to page 2

1600 SERIES HIGH VELOCITY COLD AIR BAFFLE BURNER - 3

ENVIRONMENTAL SOLUTIONS 1600 SERIES HIGH VELOCITY COLD AIR BAFFLE BURNER Holes are equally spaced and straddle center lines. Pilot/UV locations Pilot/UV dimensions). 125# standard flange pattern Mounting Flange Data: Holes are equally spaced and straddle center lines.

Open the catalog to page 3