1560 SERIES - LUMIFLAME® ULTRA3 LOW NOXTM HOT OR COLD AIR BAFFLE BURNER CAPABILITIES • • • • • Very low NOx emissions High release rates with moderate air pressure Excellent turndown with flame characteristics and direction maintained. Ten to one turndown with optional lance. Operation at 5% to 10% excess air is recommended to minimize NOx Multiple fuel capabilities: most gases and many oils FEATURES • • • • • Rugged fabricated construction LumiFlame® refractory baffle stabilization shields the burner internals from flame and it is a self supporting stable structure Standard design suitable for operation at furnace temperatures to 2600°F and air temperatures to 1000°F. Special construction is available for higher temperatures Heat resistant alloy nozzle Provisions for flame monitoring APPLICATIONS • • • • Longitudinally fired slab reheating furnaces Longitudinally fired billet reheating furnaces Side fired reheat furnaces using impulse combustion control Other applications requiring low NOx The Bloom 1560 Series refractory baffle burner is designed for gaseous and liquid fuels and is suitable, without change, for any gas having a heating value of approximately 500 Btu per cubic foot or greater. For designs using a lower heating value, contact your local representative or Bloom Pittsburgh. The Bloom baffle burner will operate equally as well on many oils. For distillate fuel oils, the burner is available with the 1800 FET Series atomizer. The 1800 FET Series atomizer can be supplied with a retractable design, which permits operation on gas with oil burner in place or retracted. B L O O M Engineering Company, Inc. 1560-CS/COE-002-000106 5460 Horning Road Pittsburgh, PA 15236 Phone 412-653-3500 Fax 412-653-2253 e-mail: [email protected] ©Bloom Engineering Company, Inc. - 1999