Catalogs >
Bloom Engineering >
1070 SERIES ULTRA LOW NOX TM HOT OR COLD AIR BAFFLE BURNER

1070 SERIES ULTRA LOW NOX TM HOT OR COLD AIR BAFFLE BURNER
5Pages

Catalog excerpts

1070 SERIES ULTRA LOW NOX TM HOT OR COLD AIR BAFFLE BURNER - 1

11/09 1070 SERIES ULTRA LOW NOXTM HOT OR COLD AIR BAFFLE BURNER CAPABILITIES High release rates with moderate air Good turndown with flame characteristics and direction maintained Stable flames can be from highly oxidizing for tempered flame operation to highly reducing for maintaining atmospheres FEATURES APPLICATIONS Rugged fabricated construction Slab Reheating Furnaces Patented low NOx refractory baffle stabilization shields the burner internals from flame and it is a self supporting stable structure Ladle Dryers Suitable for operation at furnace temperature up to 2600°F (1427°C) Air Heaters Heat resistant alloy nozzle Provisions for flame monitoring Pilot or air assisted spark ignition available Billet Reheating Furnaces Ingot Heaters Hot Metal Mixer Boilers Copper and Aluminum Reverberatory Furnaces and many other applications BURNER IGNITION CONTROL Volumetric fuel to air ratio control recommended. FLAME MONITORING U.V. Detector Please contact your Bloom Representative for flame monitoring with residual oils Pilot Manual FUEL CAPABILITIES Natural Gas ** LP Gas Coke Oven Gas * #2 Oil through #6 Oil and Tar Many other Applications The Bloom 1070 Series refractory baffle burner is designed for gaseous and liquid fuels and it suitable, without change, for any gas having a heating value of approximately 500 Btu per cubic foot or greater. For designs burning lower heating value gases, contact your local representative or Bloom Pittsburgh. * The Bloom baffle burner will operate equally as well on most oils. For distillate fuel oils, the burner is available with the 1800 FET Series atomizer. The 1800 FET series atomizer can be supplied with a retractable design, which permits operation on gas with oil burner in place or retracted. ** Turndown lance may be required. CAUTION: The improper use of combustion equipment can result in a condition hazardous to people and property. Users are urged to comply with National Safety Standards and/or Insurance Underwriters recommendations © Bloom Engineering Co 2009 1

Open the catalog to page 1

1070 SERIES ULTRA LOW NOX TM HOT OR COLD AIR BAFFLE BURNER - 2

11/09 1070 SERIES ULTRA LOW NOXTM HOT OR COLD AIR BAFFLE BURNER The Bloom 1070 Series Low NOx burner utilizes Bloom’s renowned low NOx baffle. This same burner can also utilize external flue gas recirculation for additional NOx control. The standard 1070 Series burners are available in 6” through 24” body sizes with nominal capacities from 3 mm to 40 mm Btu/hour. The design principles of this burner allow it to be custom designed for applications requiring special mounting arrangements and/or extended turndown capabilities. The unique design of this burner utilizes recirculation of furnace...

Open the catalog to page 2