Advantages Minimum size at high output Low weight Dual output voltage for series or parallel connection Protected against overload by integral temperature fuse Minimal no-load losses Outstanding temperature behavior due to low magnetic leakage field Very low noise field Applications As a mains transformer for adjustment of the voltage and simple electrical isolation. As an isolating transformer as specified in EN 61558-2-6 for the safe electrical isolation of the input and output sides. The transformer may be used to set up protective separation as a protective measure in accordance with VDE 0100. As a safety isolating transformer as specified in EN 61558-2-6 for the safe electrical isolation of the input and output sides. The transformer is suitable for creating SELV and PELV circuits because of the limit on the output voltage. Sample application Isolating transformer to: VDE 0570 Teil 2-4, DIN EN 61558-2-4, EN 61558-2-4, IEC 61558-2-4, UL 5085-1/-2, CSA 22.2 No.66

Rated input voltage Rated frequency Output Rated output voltage Power No-load voltage (app. x factor) No-load loss (typ.) Efficiency Terminal and mounting Fixing method Terminals Mounting kit, M4 bolt Connecting leads, 200 mm Major diameter Ø Outside diameter in the area of the wire lead Ø Height without mounting Weight 2.68 inch 2.76 inch 1.22 inch 1.01 lbs Standards Classification Mains transformer Approvals Approvals Environment Ambient temperature max. Safety and protection Type Insulation class Protection index Safety class (prepared) Short circuit strength Test voltage Open type VDE=B,...