tube is cut to length on an (ADIGE) CM601 saw, then endformedin-line Special application integrating tube cutting and endforming into afully automatic process. Working from either coil stock through a straightening process and/or straight random stock lengths, the on a (BLM), "All-Electric" multi-station endformer, the finishedcomponents being then discharged onto an unloading conveyor. FEATURES > cutting up to 102 mm diameter > Օ feeds coil stock tube up to 35 mm diameter and straight stocklengths of 6m randoms > endforming up to 80 mm diameter (doming up to 35 mm) ADVANTAGES > Օ fully automated and integrated process, reduces labourcosts and handling time > reduces cycle time per component > Օ significant scrap savings when utilising coil stock > no handling time between processes > Our technical sales staff is at your complete disposal for further information or to arrangea demostration. Contact BLM tel. +39 031 7070200 Օ e-mail: [email protected] www.blmgroup.com size="-1">

via Selvaregina, 30 22063 Cantչ (CO) Italytel +39 031 7070200 fax +39 031 715911e-mail: [email protected] Օ www.blmgroup.com www.blmgroup.com >