INGROUND LIFTS
12Pages

INGROUND LIFTS

SL235MP INGROUND LIFTS WITH BALANCE PLATES ARE THE PERFECT SOLUTION FOR NORMAL REPAIR WORK. ABSOLUTE FREEDOM ALL AROUND AND UNHINDERED ACCESS TO ALL AREAS OF THE VEHICLE OFFER THE BEST WORKING CONDITIONS. THE MECHANIC DOES NOT HAVE TO CONTEND WITH ABOVE-GROUND RAMS OR SWIVEL ARMS REACHING UNDER FROM OUTSIDE. 260 bar high-pressure hydraulic unit in lower oil design with integrated 3.0 kW motor, valve, and oil fill volume. Maximum corrosion protection by cataphoresis + powder coating Eleoxal-Aluminium plates adjustable longitudinally or longitudinally and perpendicular to the direction of...

Capacity Stroke A. Overall length Drive over height Support range, longitude Support range, transverse Cylinder diameter B. Cylinder spacing Installation depth Motor performance Electrical connection (3 phases) Lifting time Lowering time ACCESSORIES Rubber bases pyramid 70 mm, 4 pieces, Art.No. TOP11005 Rubber bases pyramid 1400 mm, 4 pieces, Art.No. TOP11035 Rubber bases, 120 x 120 x 40 mm, 4 pieces, Art.No. TOP11006 Rubber bases, 290 x 335 x 20 mm, 4 pieces, Art.No. TOP11007 Detailed information see blitzrotary.com Recessed floor spotlights, Art.No. TOP12112 2nd control unit, Art.No....

SL235S3, SL235RA/SL250RA/SL460RA, SL235BR, SL250BR-RA DUE TO THEIR NUMEROUS ADJUSTMENT OPTIONS, INGROUND LIFTS WITH SWIVEL ARMS ARE SUITABLE FOR NEARLY ALL REPAIR JOBS. COMPARED TO THE S2/S3 ENTRY-LEVEL MODELS, THE SWIVEL ARMS FOR THE RA MODELS ARE FASTENED ONTO A SLIDER, AND CAN THEREFORE BE MORE FINELY ADJUSTED. THE SPECIAL STRENGTHS OF THE BR MODELS ARE ESPECIALLY SUITABLE FOR BODYWORK. All platforms included 260 bar high-pressure hydraulic unit in lower oil design with integrated 3.0 kW motor, valve, and oil fill volume. 3-fold extendable swivel arms cover the support ranges of small...

SL235RA supporting arms, 3-part transversely movable SL250RA supporting arms, 3-part transversely movabler SL235BR supporting arms, 2-part longitudinally movable Rotary plate height min. 96,5 mm 93,5 mm 110 mm 141 mm 111,5 mm 97,5 mm 110 mm Rotary plate height max. 150,5 mm 147,5 mm 164 mm 195 mm 165,5 mm 130,5 mm 164 mm Lifting time SL460RA 2-cylinder inground lift with 4-part supporting arms, including support plates, 3 times telescopic ACCESSORIES 2nd control unit, Art.No. TOP12137 Detailed information see blitzrotary.com Adapter kit, 4 pieces, height 102-141 mm/ 128-198 mm/ 198-300 mm

SL235DOP/SL235DOR-DP/SL235DOR-RA ALU TRACK INGROUND LIFTS WITH DRIVE SURFACES ARE ESPECIALLY SUITABLE FOR DIRECT RECEIVING AND THE REPAIR AREA – AND, WITH OPTIONAL WHEEL ALIGNMENT KIT, ALSO FOR WHEEL ALIGNMENT. ALL MODELS CAN BE RETROFITTED WITH A JACKING BEAM. THE DP COMES STANDARD EQUIPPED WITH A JACKING BEAM BUILT INTO THE DRIVE SURFACE. Dye cast aluminium balance plates (MP models only), adjustable longitudinally or longitudinally and perpendicular to the direction of approach ensure comfortable and reliable vehicle support. They provide an enormous range of support while occupying a...

Stroke lifting table - Overall length with drive-on ramps 5820 mm E. Platform length of lifting table - XY support XY support supporting arms, supporting arms, Support range, wheel free, longitudinal Support range, wheel free, transverse Supporting arm length min. Supporting arm length max.

SL440DOP/SL450DOP THE SL450DOP IS A NEW VERSION FURTHER EXTENDING THE WIDE RANGE OF USES FOR THE INGROUND LIFTING SYSTEM. 4 LIFTING UNITS USED TOGETHER WITH LOCK RODS MAKE IT POSSIBLE TO USE AS A WHEEL ALIGNMENT LIFT. OF COURSE THERE IS ALSO NO REASON NOT TO USE THE LIFT FOR DIRECT RECEIVING OR REPAIRS AS WELL. 260 bar high-pressure hydraulic unit in lower oil design with integrated 3.0 kW motor, valve, and oil fill volume. Foil keyboard for raising and lowering with tactile feedback and visual error display plus lockable power switch – incl. emergency air release on the control section....

Overall length with drive-on ramps (short/long) C. Overall width Closed height Platform length Platform width Cylinder diameter Cylinder spacing, transverse direction Installation depth Motor performance Electrical connection Lifting time Lowering time ACCESSORIES Drive-on flaps short for installation at floor level, Art.No. TOP12121 Drive-on flaps long for installation resting on the floor, 1250 mm, suspended, excavation bevel 7°, Art.No. TOP12122 Cross brace for installation at floor level (except SL440), Art.No. DetailedTOP12106 see information blitzrotary.com Limit on driving, Art.No....

SL135MP,SL135RA 1-CYLINDER INGROUND LIFTS FROM BLITZROTARY ARE AVAILABLE WITH H CHASSIS AND X CHASSIS. THE H CHASSIS VERSION IS USED PRIMARILY IN THE AREA OF MAINTENANCE; THE X CHASSIS VERSION IS ESPECIALLY SUITABLE FOR BODYWORK. BOTH BOAST THE SAME RUGGED DESIGN AND THE SAME FLAWLESS QUALITY. Dye cast aluminium balance plates (MP models only), adjustable longitudinally or longitudinally and perpendicular to the direction of approach ensure comfortable and reliable vehicle support. They provide an enormous range of support while occupying a minimum amount of floor space. Foil keyboard for...

Capacity Stroke Drive over height Rotary plate height min. Rotary plate height max. Support range, longitude Support range, transverse D. Support range Supporting arm length min. Supporting arm length max. Cylinder diameter Installation depth Motor performance Electrical connection (3 phases) Lifting time Lowering time Rubber bases pyramid 70 mm, 4 pieces, Art.No. TOP11005 Rubber bases pyramid 1400 mm, Rubber bases pyramid, 4 pieces, 4 pieces, Art.No. TOP11035 height 70 mm Art. Nr. TOP11005/ 140 Rubber bases, 120 x 120 x 40 mm, 4 pieces, Art.No. TOP11006 Detailed information see...

LOOK LOCAL – ACT GLOBAL WE ACT WITH FOCUS ON OUR CUSTOMERS AND THEIR REQUIREMENTS. LOCAL SUBSIDIARIES WORLDWIDE PERMIT US TO DO SO, AND AT THE SAME TIME, OFFER A HIGH DEGREE OF PRODUCT FLEXIBILITY. Rotary Lift’s story of success started in 1924. Inspired by a barber chair rising in the air, company founder Peter Lunati developed the world’s first vehicle lift. The lift could rotate. This design made it possible for vehicles to drive on and off the lift in forward gear. An important argument considering the frequent problem of reversing at that time. The patent for the lift was granted on...