reduction of volume and rinsing, the compactor of contaminated waste, the compactor of cans and barrels
5Pages

page 1 Phone: 01 64 98 79 79 Fax 01 64 98 79 78 Machines for waste preparation Z.I. de Chenet 91490 MILLY-LA-FORET E.mail: blik@blik.fr Handling reduced surface of assembly, facilitating the installation plate of compaction with points screwed for perforation of the barrels and vat of collection for the residual liquids facilitating the processing Technique They are supplied as standard with a removable vat of retention of 80 liters. Optionnally, a low hydraulic punch associated with a retention-vat of 300 liters ensure that was well completely empty Thanks to their robust and reliable technique, these two barrel presses do not require any maintenance partiquement. Because of their short rates and their very simple handling, the PF 16 and the PF 25 represent solutions of economic and effective processing waste. Assets of the PF 16 and PF 25: their largely dimensioned power: 5.5 KW /7, 5kW. Their guidance system with slides on more than 400 mm in height. Their punches of drilling of the lids with machined vents. The quality of their hydraulic components. Barrel Press Blik PF 16 / 25 High throughput - up to 100 barrels per hour. `With sump tray for residual fluid. Front inspection window 17 or 25 tons pressing power. Suitable for light metal and rolled hoop barrels. punches for the maintenance of the barrel and the emptying of the air the piston goes down until the bottom the piston is raised, the barrel is withdrawn, the liquid is evacuated and collected in the vat of retention

Machines for waste preparation Z.I. de Chenet 91490 MILLY-LA-FORET (France) BLiK Phone: 01 64 98 79 79.- Fax: 01 64 98 79 78.- E.mail: blik@blik.fr.- Site Internet: www.blik.fr page 2 1 ) 2 ) 3 ) Barrel Press Blik Pf 16 / 25 Assistance system for handling drums: conveyor roller (optional) Model PF 16 PF 25 Pressing power in tons 17 25 Theoric minimum duration of a cycle 25 30 Barrel type; 200 et 220 liters Light metal Light metal / hooped loading opening (mm) 750 750 barrel dimensions up to 200 l (diam x H) 630 x 965 630 x 965 Hourly output in barrels env.40 à 50 env.40 à 50 Retention-vat...

page 3 Machines for waste preparation Z.I. de Chenet 91490 MILLY-LA-FORET (France) BLiK Phone: 01 64 98 79 79.- Fax: 01 64 98 79 78.- E.mail: blik@blik.fr.- Site Internet: www.blik.fr guarantee 1 year by BLIK Adapted perfectly to its function, it carries out the three required objectives: 1: To conform to the environmental standards 2: reduction of volume 3: saving of time and economies This hardware is designed for the «rinsing» of the metal drums then their crushing before their evacuation towards recycling «scrap iron» . BLiK RF7 BARREL PRESS WITH AUTOMATIC RINSING DEVICE

B L i K Machines for waste preparation Z.I. de Chenet 91490 MILLY-LA-FORET (France) Phone: 01 64 98 79 79.- Fax: 01 64 98 79 78.- E.mail: blik@blik.fr.- Site Internet: www.blik.fr page 4 Water consumption, in liters for 20 seconds of rinsing, according to the pressure Type of tube Type of the jet Pressure of use (bar) Maximum 10 bars 3 5 10 360° - PL 4.5 6,3 8 11,3 360° - PL 9.9 13,3 17,3 24,3 360° - PL 13.6 18,3 23,6 33,6 values for auto-revolving rotary tube PL: smooth bearings Cane washing with auto-revolving rotary tube control by telemechanic programmable automat Simple use by buttons...