Blik Plastic bottle Perforator
4Pages

or the purpose of this test, this perforator has been fitted with a small capacity hopper of approximately 100 litres. > oppers can be made to suit any requirements. > he model being presented here is a Perf-400/510 model. It has an output of between 12 and 15,000 bottles per hour. > here is also a 400/750 version of this model with an output of approximately 20,000 bottles per hour on continuous feed. > he perforation tools have been carefully designed to snap the bottles efficiently, regardless of the type or contents of the bottle from 0.5 to 2 litres. It can also be used for perforating large capacity HDPE cans. > he speed ratio of the shaft has been optimised to obtain the best Speed/density ratio without tearing or cutting the bottles. Each 1.5 litre bottle is perforated between 8 and 15 times. The blades are independent and interchangeable. > he perforators in this series can also be fitted to automatic bale press hoppers. They can be mobile, so that they can be attached to the hopper if the press has only one chute or fitted permanently, parallel to a side opening towards the press. > BLIK - Waste Recovery and Processing Equipment telephone: Z.I. de Chenet 91490 MILLY-la-FORET E.mail: blik@blik.fr 33 (0)1 64 98 79 79 fax: 33 (0)1 64 98 79 78 page 1 size="-3">

ayout and dimensions of the perforating block without chassis and hopper. If required, the length can be reduced by changing the gear. > he 750 version is 250 mm longer. The other dimensions are identical. The control box can be placed anywhere. > his machine has also been designed to handle objects that are accidentally fed into it. The example below shows how the machine deals with a bottle with a knife accidentally left inside and some planks of wood. > he PERF-400 is strong enough to handle these objects. It is fitted with an electronic control system, which stops the machine in the...

PLASTIC BOTTLE PERFORATOR BLIK ֖ PERF-400-600 (continued) PLASTIC BOTTLE PERFORATOR BLIK ֖ PERF-400 & 600:GENERAL TECHNICAL FEATURES Model PERF- 400/510 PERF-400/750 PERF 600/750/950 Working section (mm) 420 x 510 420 x 750 600 x 950 No base between blades28/35 mm 28/35 mm Motor 5,5 kW 7,5 kW 11 kW Weight Env. 500 kg Env. 650 kg Env. 1400-1700 kg Hourly output of 1.5 litre bottles12 15000 20.000 30 50.000 Electronic overload managementYes Yes Yes Can be fed directly from bale Presses YesYesYesࠓEC equipment with a 1-year warranty > Waste Recovery and Processing Equipment Z.I. de Chenet 91490...

Waste Recovery and Processing Equipment Z.I. de Chenet 91490 MILLY-LA-FORET (France) >