Blaxtair ^LAXTAR.

1 Description The Blaxtair Checklist is a tool used to ensure compliance with safety regulations and standards in workplaces. It consists of a series of questions that guide employers and employees in identifying potential hazards, assessing safety practices, and implementing corrective measures to prevent workplace injuries and accidents. The checklist system consists of: • a smart display installed on a vehicule with an optional PIN code access and set of checklist questions • an online web dashboard to administrate the vehicle fleet equiped with the checklist, create accounts and analyse reports...

2 Product versions The Blaxtair checklist can either be installed : • Stand alone : Smart AI display with its craddle installed on the vehicule. The smart display is touchscreen. It allows to answer the questions. • Embedded to BXTO : The display of BXTO is replaced by the Smart AI display of the checklist. After filling the checklist, the smart display switchs to the BXT Origin detection live view. The checklist can be installed on an existing BXTO. A software update might be required. The blaxtair checklist needs a 12-32VDC power. The smart diplay datasheet is presented here. This document...

The Blaxtair Checklist features are presented below: • PIN CODE FEATURE: allows to identify the user of the vehicule. This feature can be enabled or disabled via the checklist dashboard. If PIN CODE is activated, it will be requested at each key off/ key on and can therefore serve as an access control • QUESTIONS FEATURE: allows to perform and inspection of the vehicule depending on the answers to a set of questions. • The questions can be either critical or not. The critical questions are those that control if the inspection is failed or succeded. • The questions can require or induce an interaction...

4 Needs and requirements The Blaxtair checklist to work it is MANDATORY to have 4G or WIFI connection for: • Setting up of the checklist (first configuration for example) • Updating content of the checklist (change of questions for exemple) • Sending reports to the checklist dashboard The blaxtair checklist needs a 12-32VDC power. Note The checklist can still be answered in case of absence of connection. The validated report will be sent afterwards when the connection is retrieved.

5 Ordering information Checklist Product 1 x Metal Cradle with cables with 6 axis mount bracket (Power : VCC 12-32V, 2 x Inputs, 2 x outputs & AHD camera connector) 1 x Protective hood 1 x Relay kit 12V 1 x Relay kit 24V 1x 4m extension cable Blaxtair Origin pedestrian detection system with checklist - MR120 - Forklifts and small trucks configuration - Front or Rear application - 5 m 1 x color camera with a U-bracket mount, 1 x 5m camera cable, 1 x processing unit - 12-24VDC - including 128 GB SSD, IOT/GPS module & antenna, and fuse kit, 1 x power supply cable including inputs, output, and Can...