ML-Sliding Vane Pumps
4Pages

{{requestButtons}}

Catalog excerpts

ML-Sliding Vane Pumps - 1

Spec Sheet 106-001 Section: Effective: Replaces: ML4 Series The Flexible Pump Solution for Fluid Processing and Transfer

Open the catalog to page 1
ML-Sliding Vane Pumps - 2

Blackmer ML4 Series Fluid Processing Pumps A tough pump for tough services Blackmer’s ML4-inch Series positive displacement rotory pumps are designed for the long run. They are ideal for handling everything from thin non-lubricating solvents, to highly viscous liquids or abrasive slurries. Count on the ML4 when you need continuous duty performance over a wide range of services: chemicals, petroleum, paint and coatings, pulp and paper, and food processing. How Blackmer’s sliding vane action works ML4 combines proven sliding vane design with interchangeable hubs engineered to your service Our...

Open the catalog to page 2
ML-Sliding Vane Pumps - 3

Heavy-Duty / Modular Design / Minimum Maintenance Design Parameters Flow rates: up to 600 gpm (136 m3/h) Operating temperatures: to 400°F (204°C) Viscosity range: 30 to 500,000 ssu (1.0 to 108,000 cS) Suspended particle handling: up to 400 microns at concentrations to 40%. End Discs: protect the heads from wear. Can easily be replaced if ever needed. Optional wear-resistant end discs are available for highly abrasive fluids. Rotor & Shaft: double ended for convenience of driving the pump in either direction. Elastomers: FKM is standard. Also available with PTFE. Maximum differential...

Open the catalog to page 3
ML-Sliding Vane Pumps - 4

Horsepower (hp) and nominal flow rates are for the conditions specified at 50 psi (3.5 bar) differential pressure. ­­Refer to performance curves for capacities and horsepower at other operating conditions. Reduced liner models are available with flow and hp of about 75% of the standard models. Note: Viscosity for the MLX4 pump model is limited to 100,000 ssu (21,000 cS). Maximum Operating Limits Differential Pressure Pump Model Flow Rate Working Pressure Pump Speed Dimensions – Inches (mm) Pump Model ML4 LESS RELIEF VALVE WITH RELIEF VALVE With Relief Valve Less Relief Valve * All ML4 pumps...

Open the catalog to page 4

All Blackmer catalogs and technical brochures

  1. V Series

    8 Pages

  2. E Series

    8 Pages

  3. Brand Brochure

    20 Pages

  4. HD and HDL

    6 Pages

  5. SMVP Pumps

    4 Pages

  6. HXL Series

    2 Pages

Archived catalogs