HD and HDL
6Pages

{{requestButtons}}

Catalog excerpts

HD and HDL - 1

HD and HDL Single-Stage Non-Lube Gas Compressors Ethylene Ethylene Oxide HCFC’s Helium n-Heptane n-Hexane Hydrogen Hydrogen Chloride Hydrogen Sulfide Isobutane Isobutene Isobutylene Isopentane Methane Methanol Methyl Acetylene Methyl Acetylene Propadiene Methyl Chloride Methyl Mercaptan Monoethylamine Natural Gas Neon Nitrogen Nitrogen Dioxide Nitrous Oxide Oxygen Ozone n-Octane n-Pentane Air Allene Ammonia Argon Benzene Bromotrifluormethane Butadiene Butane Carbon Dioxide Carbon Monoxide Carbon Tetrachloride Carbon Tetrafluoride CFC’s Chlorine Chlorodifluoromethane Chloroform Chlorotrifluoroethylene Chlorotrifluoromethane Cyanogen Cyclohexane Cyclopropane Deuterium Dibromodifluoromethane Dichlorodifluoromethane Dichlorofluoromethane 1,2 Dichlorotetra-fluoroethane 1,1 Difluoro 1-Chloroethane Dimethylamine Dimethyl Ether 2,2 Dimethylpropane Ethane Ethyl Alcohol Ethyl Chloride Propane Propylene Refrigerants Sulfur Dioxide Sulfur Hexafluoride Trichlororethane Tetrafluorethylene Trimethylamine Vinyl Chloride Xenon ...and others

Open the catalog to page 1
HD and HDL - 2

SPECIFICATIONS Model Single-Seal Double-Seal Triple-Seal Min./Max. Speed (rpm) Piston Displacement @ 100 rpm - CFM (m3/hr) @ Min rpm - CFM (m3/hr) @ Max rpm - CFM (m3/hr) Max. Discharge Temperature Max. BHP (kw) Approx Wt. w/ Flywheel Inlet & Outlet Coolant Connections (HDL only) Double-Seal Triple-Seal Number of Cylinders Bore - in. (mm) Min./Max. Speed (rpm) Piston Displacement @ 100 rpm - CFM (m3/hr) @ Min rpm - CFM (m3/hr) @ Max rpm - CFM (m3/hr) Max. Discharge Temperature * Max. BHP (kw) Approx Wt. w/ Flywheel Coolant Connections (HDL only) Inlet & Outlet, NPT - in. 'HD' models are...

Open the catalog to page 2
HD and HDL - 3

Vapor Recovery Gas Gathering Gas Transfer Gas Evacuation Enhanced Recovery Gas Blanketing Pressure Boosting Flare Elimination Leak Test Recovery Liquid Gas Transfer TYPICAL MOUNTING STYLES -CO Compressor with flywheel. Compressor mounted on a baseplate with V-belt drive system with guard and motor slide base ready to accept but less motor. -B Unit plus a mechanical liquid trap, NPT piping and pressure gauges. -B Unit plus an ASME code liquid trap, high liquid level switch, NPT piping and pressure gauges. -B Unit plus an ANSI flanged trap, high liquid level switch, welded piping and pressure...

Open the catalog to page 3
HD and HDL - 4

STANDARD FEATURES Ductile Iron Head & Cylinder provide toughness & strength unmatched by cast iron. Water-cooled head & cylinders on HDL models reduce operating temperatures and extend wear life. High efficiency PEEK (Poly Ether Ether Ketone) valve plates provide extended life due to the low mass and self-lubricating qualities of the PEEK material. In addition, the slight 'give' of a plastic versus a metal plate allows it to survive more abuse and provide better sealing throughout the life of the valve. (300, 600 & 900 series) High efficiency stainless steel valve plates with steel seats...

Open the catalog to page 4
HD and HDL - 5

Optional 1/4” NPT pressure gauges shown. * For units with Unloaders: 100 Series - add 2.7" (69 mm), C

Open the catalog to page 5

All Blackmer catalogs and technical brochures

  1. V Series

    8 Pages

  2. E Series

    8 Pages

  3. Brand Brochure

    20 Pages

  4. SMVP Pumps

    4 Pages

  5. HXL Series

    2 Pages

Archived catalogs