Catalogs >
Blackmer >
ABAQUE Peristaltic (Hose) Pump

ABAQUE Peristaltic (Hose) Pump
4Pages

Catalog excerpts

SPEC SHEET 1103-001 Section: 1103 Effective: May 2009 Replaces: New ABAQUE Peristaltic (Hose) Pump Pump With Confidence Reliable The Blackmer ABAQUE Series pump can handle your toughest pumping needs – from abrasive and aggressive to shear-sensitive and viscous materials. The Blackmer ABAQUE Series pump is self-priming to 29.5 ft (9 meters) manometric lift. This pump is able to run dry continuously without detrimental effects. The pump is capable of running in forward or reverse. Durable Ductile iron and steel construction allow higher discharge pressures to 217.5 psi (15 bar). Its solid construction and advanced design also reduce maintenance and repairs. Process | Energy | Seal Free Seal free design eliminates leaks and contamination. Fluids are contained within the hose. The hose is the primary maintenance component. Transport | Military & Marine

Open the catalog to page 1

ABAQUE Peristaltic (Hose) Pump Pumping action is achieved by compression of a circular loop of elastomeric hose with two diametrically opposed rotating shoes. This rotational motion forces the fluid in the hose to move ahead of each shoe. When each shoe reaches the end of the loop, the reinforced tube immediately returns to its original shape, thereby ensuring suction and priming. The pump housing is partially filled with lubricant, aiding smooth running of the shoes on the hose. The inside of the hose and hose inserts are the only pieces of equipment in contact with pumped fluids, allowing...

Open the catalog to page 2

The following hoses are available for use in the ABAQUE pump: ■ Natural rubber: Highly resilient with excellent abrasion resistance and strength. Generally resistant to diluted acids and alcohols. ■ Buna (NBR): Highly wear resistant to oily products. ■ EPDM: High chemical resistance, especially with concentrated acids, alcohols and ketones. The ABAQUE pump is available in 9 different sizes, ranging from flow rates of .07 to 211 gpm (.015 to Also available: ■ Non-metallic inserts (PPH, PVDF) Performance Data Constant Duty at Maximum Pressure Intermittent Duty at Maximum Pressure *Flow rates...

Open the catalog to page 3