TeraBox 1401B 1U FPGA Server Extreme Density Standard-Depth FPGA Server 1U, 4 card, PCIe Gen4 x16, AMD EPYC 7002 series At the extreme of FPGA server density, the TeraBox 1401B gives the highest level of compute and network capability in a 1U chassis. This server provides twice the density of the typical 4U server and the power of 4 of our largest Achronix Speedster7t, Intel Stratix 10 or Xilinx UltraScale+ FPGAs. This innovative product supports PCIe Gen4 and features an AMD EPYC processor in a standard rack depth chassis. Standard Height Double Slot 4 FPGAs in a standard-depth 1U server Support for BittWare’s full range of FPGA cards chassis key specs 1U depth, 28.25 in (71.75 cm) Processor: (1) AMD EPYC 7002 Series Processor Ethernet: 2x RJ45 10G base-T by Intel® X550-AT2, 1x RJ45 Dedicated IPMI LAN port by RTL8211E Memory: 8x DDR4 DIMMs Storage: 2x M.2 Slots: 4x front panel PCIe Gen4 x16; 1x rear panel low-profile Gen4 x16 NIC slot Power supply: 1+1 AC 1300W, 110/220V

BittWare FPGA Cards The TeraBox 1401B supports up to four dual-slot BittWare PCIe FPGA cards. Choose from a variety of cards based on the Speedster 7t, Stratix 10, or Ultra-Scale+ FPGAs. System specs will vary greatly, depending on the FPGA card you select. For example, with four BittWare UltraScale+ PCIe cards, which support up to 512 Gbytes of DDR4 per card, the chassis can support as much as 2 Terabytes of DDR4 on the FPGA cards in 16 banks. With four Agilex cards using breakout cables, each chassis supports 48x 100GbE. BittWare 1U Server The TeraBox 1401B server featuring AMD EPYC processor...