TeraBox 1000S 1U FPGA Server Low-cost 1U Server for FPGA Cards Including Front Panel Access Single- or double-wide cards featuring Achronix, Intel, or Xilinx FPGAs Looking for an economical 1U server for a single FPGA card? BittWare’s TeraBox 1000S is an excellent solution that doesn’t limit your card options—any of our Achronix-, Intel-, or Xilinx-FPGA equipped PCIe cards are compatible! Front panel PCIe access gives you the best access to 4 QSFPs, with up to 8x 100G or 32x 10/25G in a single rack space! key features Dual Redundant 400W or 800W Power Supplies Our lowest-cost FPGA server Low-profile Single Slot Standard Height Double Slot Fits any BittWare PCIe card using Achronix, Intel, or Xilinx FPGAs Single Socket Intel Xeon Scalable Processor 1x PCIe Gen3 x16 for Single- or Double-Wide Cards chassis key specs 1U, depth 16.9 in (429mm) Processor: Intel® Xeon® Scalable Processor Chipset: Intel C236 Memory: 6x ECC DDR4 DIMMs Slots: 1x PCIe Gen3 x16 with front panel access Front panel access to QSFPs or other interfaces depending on FPGA config. Storage: 1x SATA 6 Gb/s, Intel C236 RAID Power supply: Dual Platinum 400W or

FPGA Cards The TeraBox 1000S supports a single- or dual-width BittWare PCIe FPGA card. Choose from a variety of cards based on Achronix Speedster 7t, Intel Stratix 10/ Arria 10, or Xilinx UltraScale+ FPGAs. Card specs vary depending on the FPGA card you select. For example, some cards support up to 512 GBytes of DDR4. Our latest UltraScale+ cards feature QSFP-DDs, which you can use with a breakout cable for up to 8x 100Gb interfaces. Development Support For system management, BittWare's FPGA cards are equipped with a Board Management Controller (BMC), which accepts IPMI 2.0 commands. Use it along...