Hyperion-402 Industrial L2+ managed Ethernet switch with 4x 10/2.5/1G and 8/16/24/32 10M/100M/1G RJ45 PoE÷High PoE IEEE 802.3bt ports or 100/1000M SFP slots ✓ A family of industrial switches featuring 4x 10/2.5/1Gbps SFP/SFP+ slots and 8/16/24/32 10M/100M/1Gbps RJ45 ports or 100M/1G SFP slots ✓ Additional NMI UTP RJ45 10/100Mbit/s management port ✓ ITU-T G.8032 compliant ring operation with < 20ms reconfiguration, up to 64 rings ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ simultaneously Support for STP, RSTP and MSTP protocols. IEEE802.1x authentication, Radius, Tacacs+ - AAA Support for PROFINET Conformance...

Features of Hyperion-402 Solid Hyperion-402 switch is designed to cope with operation in extreme environmental conditions. The device is equipped with a durable IP-30 rated enclosure, and is designed in accordance with the requirements of IEC61850-3, IEEE1613 standards. Above that, the device is suitable for operation in temperatures from -40°C to +85°C under appropriate conditions. Energy efficient Using IEEE 802.3az-compliant Energy Efficient Ethernet technology, the Hyperion402 can significantly reduce power consumption by optimizing the operation of interfaces based on port traffic load,...

Technical specifications Supported transmission standards ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Fast Ethernet IEEE 802.3u 100Base-FX Fast Ethernet Fiber IEEE 802.3ab 1000Base-T IEEE 802.3z Gigabit Fiber IEEE 802.3x Flow Control and Back-pressure IEEE 802.1AB Link Layer Discovery Protocol (LLDP) IEEE 802.1p Class of Service (CoS) IEEE 802.1Q VLAN IEEE 802.1ad QinQ IEEE 802.1D- Spanning Tree Protocol (STP) IEEE 802.1D-2004 Rapid Spanning Tree Protocol (RSTP). IEEE 802.1s Multiple Spanning Tree Protocol (MSTP) IEEE 802.3ad Link Aggregation Protocol...

Supported standards, recommendations and directives EMC, safety* PN-EN 55035:2017-09 Electromagnetic compatibility of multimedia devices Resilience requirements. Emission requirements. Information technology equipment Safety - Part 1: Basic Requirements Safety of laser equipment Part 1: Equipment classification and requirements. EMC Electromagnetic Compatibility Directive. Part 4-2: Test and measurement methods - Test of resistance to electrostatic discharge Part 4-3: Test and measurement methods - RF radiated electromagnetic field immunity test Part 4-4: Test of resistance to a series of fast...

Port Mirroring: Monitoring traffic on selected ports IEEE 802.3az: Energy Efficient Ethernet, reduced power consumption, 4 modes Port Trunk: IEEE 802.3ad LACP or static aggregation RMON, MIB II, Port mirroring, DNS , IEEE802.1ab LLDP, LLDP-MED MAC address table: up to 32k entries Optional L3 - static routing Network redundancy • ITU-T G.8032 Ethernet Ring (ERPS) • IEEE 802.1d - Spanning Tree (STP) • IEEE 802.1w - Rapid Spanning Tree Protocol (RSTP) • IEEE 802.1s - Multiple Spanning Tree Protocol (MSTP) ✓ UTP module reflectometer test: Each RJ45 port can perform a reflectometer test of all pairs...

✓ 80-350V DC/75-240V AC power supply does not support PoE ✓ Screw connectors for AC and DC power supply ✓ Total power consumption (without PoE ports) - <50W PoE power supply ✓ Compatible with IEEE802.3af, IEEE802.3at, IEEE802.3bt standards ✓ Power available per port up to 90W ✓ For 55VDC power supply, the maximum total PoE power is 500W. 19" 1U enclosure Dimensions [440x325x43] mm Metal housing IP-30 Weight approximately 3.68kg Environmental requirements for operation ✓ ✓ ✓ ✓ ✓ ✓ Operating temperature: -40°C to +85°C at an airflow of 0.4 m/s Operating temperature: -40°C to +70°C with a minimum...

Standard Dedicated version for power substations Available versions 32x RJ45 (10M/100M/1G) + 4x SFP/ SFP+ (1G/2.5G/10G) Routing functionalities (optional) Standard Static routing Power over Ethernet (PoE) (optional) Additional features Option for version with 32x SFP slots Standard built-in secondary ITU K.44 overvoltage protection for transmission path, 4kV 10/700µs in modules on RJ-45 ports Power supply Power supply 36-60VDC, for PoE in the range of 46-57VDC Power supply 80-350V DC, 75-240VAC Redundant 36-60VDC, for PoE in the range of 46-57VDC Redundant 80-350V DC, 75-240VAC Legend: 1 - For...

Additional accessories Designation Fiber optic type Insert type Conn ector type Operating temperature 100Mb support 100Mb support 100Mb support 100Mb support 100Mb support List of proposed power supplies for BITSTREAM devices Numbe Numbe Numbe Numbe Operating r of r of r of r of temperature ports ports ports ports with with with with C-standard TPoE PoE+ PoE++ PoE++ industrial (15W) (30W) (60W) (90W) Output voltage range Nominal output power Designation of the power supply Legend of designations: W - plug-in; S - standalone; R - for DIN rail. Hyperion switch expansion license kit- 402 1. SYNCE...