Catalogs >
BISON >
ServoNOW

ServoNOW
2Pages

Catalog excerpts

ServoNOW TM Easy to use Servo Motor with Controller Universal Power: 110-220 VAC, 50-60 Hz The ServoNOW™ is a complete motor and programmable control system in one package. Motion is programmed into the servo controller with easy to use software that can be loaded on any PC. Once programmed, the ServoNOW™ operates without the host PC performing the programmed motions. The programmed motions are selected based on the status of the digital inputs or switches connected to the ServoNOW™. Analog inputs can also be selected and setup to control the position or velocity of the system when desired. Because this is a servo system it has extremely good control of the speed and position of the motor despite large variations or fluctuations in the load. This result is exceptionally good control, even at low speed, of devices like actuators, pumps, conveyors and automated equipment as compared to other control methods. Benefits: • Complete programmable servo system: motor, controller and feedback in one package • Easy setup with indexing type command structure • 110/220VAC universal power, anywhere in the world • Programmable positioning and velocity control • Define and program motion with a few mouse clicks • Setup with standard PC and free host software • Select programed motion with switch or digital I/O • Work with common digital interfaces 5-24 VDC • Includes 24 VDC 40 mA for standalone operation • Plug and Play out of the box Ideal for customers who are users of: • Speed controlled motors • Motors using start/stop relays with brakes Industries which will benefit from the ServoNOW™ are: • Packaging Equipment • Factory Automation • Laboratory Automation • Peristaltic & Metering Pumps • Specialty Machinery • Conveyors • Indexing Applications • Winders • Dispensers • Valves • Rotating Signs • Gates CERTIFIED Q U AL • Linear slides and ball screws 9001:2008 SYSTEM • PLC’s and simple switch logic or relay logic equipment T EN • Clutch brakes MANAG EM ITY • Pneumatic cylinders with control position

Open the catalog to page 1

Easy to use Servo Motor with Controller • 34 C Face Mount & Side Mount • Peak Torque 300 oz-in 1-Analog Input, 1 Analog Output • Programmable I/O: 5-24 Volts, Current Sourcing, Current Sinking • Position Resolution 4096 cnts/rev • 32 Index Motion Profiles Parameter Programmability: • Input & Output Scale Factors for Defining Units of Measure for Speed & Position • Input & Output Offsets Digital Inputs • Enable/Disable Drive, Homing, 4 • Programmable Inputs Digital Outputs • Motor Enabled, Motor Fault, 4 • Assignable Outputs Additional Accessories Available:_ • Interconnect Board - Output...

Open the catalog to page 2