*mydirectindustry

Catalogs
BISON
Powerstar X43

Powerstar X43

Product catalog summary

Overview: The X43 High Efficiency Hypoid Speed Reducer is designed for applications requiring high efficiency and quiet operation. It features hardened and ground gears and is compatible with most global manufacturers.

Specifications:

Power Range: 0.25 - 0.75 HP
Output Torque: 1328 - 1416 in-lbs
Output Speed: 5.4 - 34.8 RPM
Service Factor: Varies from 0.5 to 2.4 depending on configuration
Motor Specification: 230/460 VAC, 60/50Hz, 3PH, 1800 RPM Nominal, inverter duty
NEMA Input Sizes: W = 56C, X = 143/5TC, Y = 182/4TC
Weight: 17.5 pounds

Performance Data: The document provides detailed performance data for various configurations, including output speed, ratio, motor power, output torque, and service factor. The data is organized in a table format, showing part numbers for both the reducer and gearmotor.

Technical Drawings: The document includes technical drawings of the gearbox, output flange mounting, torque arm, and output shaft insert. Dimensions are provided in both imperial and metric units.

Notes:

All units are in standard configuration with options for input motor, output shaft, and mounting.
Power ratings marked with an asterisk (*) indicate power greater than what can be supported by the gearbox for continuous duty.
Motors 1HP and greater meet EISA efficiency requirements.

Catalog excerpts

· All hardened and ground gears for high efficiency and quiet operation · Interchangeability with most global manufacturers TECHNICAL DATA X43 Output Speed (RPM) Output Torque (in-lbs) Service Factor Reducer Part Number** Notes: All units shown are standard configuration. Input motor, output shaft and mounting options are available. *Power greater than that which can be supported by the gearbox for continuous duty. Motor Specification: 230/460 VAC 60/50Hz, 3PH 1800 RPM Nom. - inverter duty *NEMA Input Sizes: W = 56C X = 143/5TC Y = 182/4TC Motors 1HP and greater meet EISA efficiency requirements.

Open the catalog to page 1

Drawings Basic Gearbox Nema Flanges Hollow shaft Hollow Shaft Output Flange Output Flange Output Flange Mounting holes position Output Shaft Insert R/L 0

Open the catalog to page 2

All BISON catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list