*mydirectindustry

Catalogs
BISON
Integral horsepower Product Catalog

Integral horsepower Product Catalog

Product catalog summary

Overview
This document is a technical catalog for Aluminum and Stainless Steel Gearmotors and Reducers, specifically the XSeries, SSeries, and QSeries. It provides detailed specifications, features, and configurations suitable for industrial machinery, conveying, and larger format applications.

Key Features

Power range from 1/4 to 5HP.
Versatile mounting and configuration options.
Available in worm or high-efficiency hypoid gearing.
Custom options available.
Lightweight single-piece aluminum construction with high tensile strength.
Removable inspection cover for maintenance.

Product Series

XSeries: High-efficiency hypoid speed reducers with various models offering different power, torque, and speed specifications.
QSeries: Models like Q45, Q50, Q63, and Q85, each with specific power, torque, and speed ranges.
SSeries: Models such as S45, S50, S63, and S85, providing a range of power and torque options.

Technical Specifications

Motors available in general-purpose, single-phase, and three-phase configurations.
Brake motors and IEC AC motors are also available.
All gears are hardened and ground for high efficiency and quiet operation.
Alloy housing is vacuum impregnated for protection and sealing, with no secondary finish required.
Flanges are modular to NEMA or IEC standard sizes.
Available in 2-stage and 3-stage combinations for a wide range of ratio options.

Technical Data and Drawings

Detailed technical data for each model, including output speed, motor power, output torque, and service factors.
Drawings and dimensions for mounting and configuration options.

Specifications
The document outlines specifications for high-efficiency hypoid speed reducers and integral HP worm speed reducers. It includes motor specifications such as 230/460 VAC, 60/50Hz, 3PH, 1800 RPM, and mentions that motors 1HP and greater meet EISA efficiency requirements. NEMA input sizes are specified as W = 56C, X = 143/5TC, Y = 182/4TC.

Procedures and Recommendations
The document recommends using synthetic oil for lifetime lubrication and specifies oil quantities for different mounting positions. It advises consulting the factory for special lubrication levels and higher radial load requirements.

Drawings and Diagrams
Detailed drawings are provided for gearbox configurations, including mounting holes, shaft dimensions, and flange sizes. The document includes tables for product selection, lubrication, and motor options.

Norms and Standards

Motors 1HP and greater meet EISA efficiency requirements.
Stainless steel housing is used for food processing, medical, and pharmaceutical applications.

Recommendations

Consider the reversibility of the worm gear set for applications requiring specific operational characteristics.
Use synthetic, semi-fluid gear lubricant for optimal performance.

Engineering Excellence
Bison is committed to engineering excellence with over 35% of its staff being accredited engineers. The company offers both standard and custom design solutions to meet customer needs, ensuring optimized designs for various applications.

Customer Service
Bison provides dedicated customer service through its inside sales specialists and outside technical sales team, ensuring quick responses to customer needs.

Flexible Manufacturing
Bison's manufacturing floor is lean and optimized, capable of responding rapidly to customer demands, whether for large or small orders. The factory is equipped with state-of-the-art equipment to expedite product delivery.

Corporate Responsibility
Bison is committed to corporate responsibility, offering continued education programs and a training center for career advancement in manufacturing. Through BisonCares, the company supports local and national charities and community programs.

Catalog excerpts

QSERIES · More power: from 1/4 to 5HP · Versatile mounting and configuration options · Available in worm or high efficiency hypoid gearing · Custom options available · Perfect for industrial machinery, conveying and larger format applications Integral horsepower Product Catalog Aluminum and Stainless Steel Gearmotors and Reducers Rev. 10.

Open the catalog to page 1

High Efficiency Hypoid Speed Reducer Removeable Inspection Cover Allows periodic inspection of gearing during routine maintenance. PowerSTAR X Technical Info 15 - 16 PowerSTAR X Selection Table 17 - 18 Q Series Technical Info Q Series Selection Table S Series Technical Info S Series Selection Table Motors General Purpose, Three Phase 47 General Purpose, Single Phase 48 Brake Motors, Three Phase 49 - 50 IEC AC Motors, Three Phase 51 - 52 Single-Piece Aluminum Combines light weight with high tensile strength. Precision machined for alignment of bearings and gearing.

Open the catalog to page 2

Gears Hardened and ground gears. Alloy Housing Is vacuum impregnated (MIL-STD 276) for protection and sealing. No secondary finish required but readily accepts paint. 100% Factory Pressure Leak Tested Ratios Available in 2 stage and 3 stage combinations for a wide range of ratio options Flange Fully modular to NEMA or IEC standard sizes. 2

Open the catalog to page 3

· All hardened and ground gears for high efficiency and quiet operation · Interchangeability with most global manufacturers TECHNICAL DATA X42 Output Speed (RPM) Output Torque (in-lbs) Service Factor Reducer Part Number* Notes: All units shown are standard configuration. Input motor, output shaft and mounting options are available. Motor Specification: 230/460 VAC 60/50Hz, 3PH 1800 RPM Nom. inverter duty *NEMA Input Sizes: W = 56C X = 143/5TC Y = 182/4TC Motors 1HP and greater meet EISA efficiency requirements.

Open the catalog to page 4

Drawings Basic Gearbox Hollow shaft Nema Flanges Hollow Shaft Mounting holes position Output Flange Output Flange Output Shaft Insert Output Flange Gearbox Weigh

Open the catalog to page 5

· All hardened and ground gears for high efficiency and quiet operation · Interchangeability with most global manufacturers TECHNICAL DATA X43 Output Speed (RPM) Output Torque (in-lbs) Service Factor Reducer Part Number** Notes: All units shown are standard configuration. Input motor, output shaft and mounting options are available. *Power greater than that which can be supported by the gearbox for continuous duty. Motor Specification: 230/460 VAC 60/50Hz, 3PH 1800 RPM Nom. - inverter duty *NEMA Input Sizes: W = 56C X = 143/5TC Y = 182/4TC Motors 1HP and greater meet EISA efficiency requirements....

Open the catalog to page 6

Drawings Basic Gearbox Nema Flanges Hollow shaft Hollow Shaft Output Flange Output Flange Output Flange Mounting holes position Output Shaft Insert R/L 0

Open the catalog to page 7

X52 High Efficiency Hypoid Speed Reducer · All hardened and ground gears for high efficiency and quiet operation · Interchangeability with most global manufacturers TECHNICAL DATA X52 Output Speed (RPM) Output Torque (in-lbs) Service Factor Reducer Part Number* Notes: All units shown are standard configuration. Input motor, output shaft and mounting options are available. Motor Specification: 230/460 VAC 60/50Hz, 3PH 1800 RPM Nom. - inverter duty *NEMA Input Sizes: W = 56C X = 143/5TC Y = 182/4TC Motors 1HP and greater meet EISA efficiency requirements.

Open the catalog to page 8

Drawings Basic Gearbox Standard Hollow shaft Hollow Shaft Output Flange Output Shaft Insert Output Flange Output Flange Mounting holes position

Open the catalog to page 9

X53 High Efficiency Hypoid Speed Reducer 0.25 - 1HP, 2213 in-lbs, 3.0 - 30.8RPM · All hardened and ground gears for high efficiency and quiet operation · Interchangeability with most global manufacturers TECHNICAL DATA X53 Output Speed (RPM) Output Torque (in-lbs) Service Factor Reducer Part Number** Notes: *Power greater than that which can be supported by the gearbox for continuous duty. All units shown are standard configuration. Input motor, output shaft and mounting options are available. Motor Specification: 230/460 VAC 60/50Hz, 3PH 1800 RPM Nom. - inverter duty *NEMA Input Sizes: W = 56C...

Open the catalog to page 10

Drawings Basic Gearbox Standard Hollow shaft Hollow Shaft Mounting holes position Output Flange Output Shaft Insert

Open the catalog to page 11

· All hardened and ground gears for high efficiency and quiet operation · Interchangeability with most global manufacturers TECHNICAL DATA X62 Output Speed (RPM) Output Torque (in-lbs) Service Factor Reducer Part Number* Notes: All units shown are standard configuration. Input motor, output shaft and mounting options are available. Motor Specification: 230/460 VAC 60/50Hz, 3PH 1800 RPM Nom. - inverter duty *NEMA Input Sizes: W = 56C X = 143/5TC Y = 182/4TC Motors 1HP and greater meet EISA efficiency requirements.

Open the catalog to page 12

Drawings Basic Gearbox Standard Hollow shaft Hollow Shaft Mounting holes position Output Flange Output Shaft Insert

Open the catalog to page 13

X63 High Efficiency Hypoid Speed Reducer 0.25 - 1.5HP, 3629 in-lbs, 3.0 - 30.8RPM · All hardened and ground gears for high efficiency and quiet operation · Interchangeability with most global manufacturers TECHNICAL DATA X63 Output Speed (RPM) Output Torque (in-lbs) Service Factor Reducer Part Number** Notes: *Power greater than that which can be supported by the gearbox for continuous duty. All units shown are standard configuration. Input motor, output shaft and mounting options are available. Motor Specification: 230/460 VAC 60/50Hz, 3PH 1800 RPM Nom. - inverter duty *NEMA Input Sizes: W =...

Open the catalog to page 14

Drawings Basic Gearbox Hollow shaft Hollow Shaft Mounting holes position Output Flange Output Shaft Insert Gearbox Weight

Open the catalog to page 15

XSERIES High Efficiency Hypoid Speed Reducer Lubrication · Units X42 - X63 are supplied with synthetic oil for lifetime lubrication, no maintenenace is required. · The gearboxes are supplied with an oil quantity applicable for mounting positions B3 - V6. · Special lubrication levels necessary for certain mounting positions. Please specify position when ordering: B6/B7/B8/V5/V6/V8. Ambient temperatures Consult Facto

Open the catalog to page 16

Integral horsepower Product Catalog

Integral horsepower Product Catalog

Catalog excerpts

All BISON catalogs and technical brochures

Archived catalogs