*mydirectindustry

Catalogs
BISON
650 Series Parallel Shaft AC

650 Series Parallel Shaft AC

1 / 2 PagesView full catalog

650 Series Parallel Shaft AC

Product catalog summary

Specifications

Gearhead: Features AGMA class 9 heat-treated steel gearing with a 1st-stage helical and balance spur. The housing is precision machined die-cast aluminum, and lubrication is provided by a lifetime oil bath, sealed and gasketed. Bearings include needle and thrust ball types, and shafts are made of hardened steel. Mounting options include face mounting at any angle or an optional footplate for 1/58 HP.
Motor: The motor is a permanent split capacitor type with reversible rotation. It includes ball bearings, Class B minimum insulation, and a TEFC/TENV enclosure. The finish is a gloss black powder coat.

Features

Includes a junction box and capacitor.
Rear shaft available on 1/58 and 1/6 HP models.

Optional Features

Power-off brake available for 1/58 HP and 1/6 HP models.
Footplate kit available for 1/58 HP.

Performance

The 650 Series offers torques up to 750 in-lbs and speeds down to 1.2 RPM.
Maximum overhung load is specified at the center of the output shaft.
Output torque is gear limited.

Models and Specifications

Part Number	Speed (RPM)	Torque (in-lbs)	Input HP	Gear Ratio	Stages	OHL*	Amps	Hz	Shipping Wt.
016-656-1412	1.2	710**	1/58	1412.8	5	900	.36/.21	60/50	15.75
016-656-0276	6.0	710**	1/6	276.2	4	900	2.1/1.1	60/50	22.5
016-656-0138	12	700**	1/6	138.1	4	900	2.1/1.1	60/50	22.5
016-656-0116	14	630**	1/6	115.9	4	900	2.1/1.1	60/50	22.5
016-656-0054	30	660**	1/2	53.8	3	650	5.2/2.8	60/50	28.5
016-656-0028	58	490	1/2	27.7	3	600	5.2/2.8	60/50	28.5
016-656-0019	81	345	1/2	19.5	3	550	5.2/2.8	60/50	28.5
016-656-0014	119	240	1/2	13.7	2	500	5.2/2.8	60/50	28.5

Additional Information

Current drawings and stock status are available at www.bisongear.com.
Products are available off-shelf (ISIS) and have minimum order quantities and lead times (SNS).
Wiring diagrams can be found on pages 88-91, and additional accessories on pages 86-87.

Catalog excerpts

650 Series Parallel Shaft AC UP TO 710 IN-LBS CONTINUOUS The 650 Series offers strength and versatility with torques up to 750 in-lbs., and speed down to 1.2RPM. Specifications AC PARALLEL SHAFT GEARMOTORS Gearing: AGMA class 9 heat treated steel 1st-stage helical, balance spur Housing: Precision machined die cast aluminum Lubrication: Lifetime oil bath, sealed and gasketed Bearings: Needle and thrust ball Shafts: Hardened steel Mounting: Face (any angle) or optional footplate on 1/58 HP Motor Type: Permanent split capacitor Rotation: Reversible Bearings: Ball Insulation: Class B minimum Enclosure: TEFC / TENV Finish: Gloss black powder coat • Included junction box • Included capacitor • Rear shaft on 1/58, 1/6HP Wiring diagram pages 88-91 See pages 86-87 for additional accessories Optional Features • • Power-off brake on 1/58 HP & 1/6 HP only Footplate kit for 1/58 HP P125-650-5000 Additional Information Current drawings and stock status available at www.bisongear.com ISIS - Products available off-shelf SNS - Min. order quantity and lead time 656 Series PSC 115V/230V Part Number Torque (in-lbs) * Maximum overhung load on center of output shaft. Gear Ratio ** Output torque is gear limited. 650 Series 3-Phase Inverter Duty 230V For more specifications see page 64 TAP 1/4-20 UNC-2B 0.44 MIN THREAD DEPTH (6) HOLES Gear & Engineering Corp. Want to know more? www.bisongear.com

Open the catalog to page 1

650 Series Parallel Shaft AC AC PARALLEL SHAFT GEARMOTORS TAP 1/4-20 UNC-2B 0.44 MIN THREAD DEPTH (6) HOLES Want to know more? www.bisongear.com TAP 1/4-20 UNC-2B 0.44 MIN THREAD DEPTH (6) HOLES Gear & Engineering Corp.

Open the catalog to page 2

All BISON catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list