*mydirectindustry

Catalogs
BISON
100 & 175 Series Parallel Shaft AC

100 & 175 Series Parallel Shaft AC

Product catalog summary

Specifications
Gearhead:
- 100 Series: 1st-stage helical steel, balance powdered metal or steel.
- 175 Series: 1st-stage helical steel, balance heat-treated steel or powdered metal.
- Housing: Precision machined die-cast aluminum.
- Lubrication: Lifetime oil bath, sealed and gasketed.
- Bearings: Needle output.
- Shafts: Hardened steel.
- Mounting: Face or optional footplate (any angle).

Features:
- Included junction box.
- Included capacitor on PSC units.
- Rear shaft on PSC units.
- 175-3 Phase IP 54 enclosure.

Optional Features:
- Power-off brake for PSC motors.
- Footplate kit.
- Part number: P125-100-9998.

Motor:
- Motor Type: Permanent split capacitor and 3 phase.
- Rotation: Reversible.
- Insulation: Class B minimum.
- Finish: Gloss black powder coat, 175 3-phase unpainted.
- Enclosure: Open 1/80 & 1/10 HP, TENV 1/20 HP, TEFC 1/12 HP.

Performance Data:
- The 100 and 175 Series offer a wide speed range and many voltage options in an ultra-compact package.
- Various part numbers with specifications such as speed (RPM), torque (in-lbs), input HP, gear ratio, stages, OHL, amps, Hz, and shipping weight are provided.

Additional Information:
- Current drawings and stock status available at www.bisongear.com.
- Products available off-shelf (ISIS) and minimum order quantity and lead time (SNS).
- Wiring diagrams and additional accessories are referenced.

Dimensions and Mounting:
- Detailed dimensions and optional mounting brackets are provided for both 100 & 175 series.
- Specific measurements for mounting and shaft dimensions are included.

For more detailed specifications and inquiries, visit www.bisongear.com or contact 1-800-AT-BISON.

Catalog excerpts

100 & 175 Series Parallel Shaft AC UP TO 170 IN-LBS CONTINUOUS The 100 and 175 Series offer a wide speed range and many voltage options in an ultra-compact package. AC PARALLEL SHAFT GEARMOTORS Gearing: 100 Series: 1st-stage helical steel, balance powdered metal or steel 175 Series: 1st-stage helical steel, balance heat treated steel or powdered metal Housing: Precision machined die cast aluminum Lubrication: Lifetime oil bath, sealed and gasketed Bearings: Needle output Shafts: Hardened steel Mounting: Face or optional footplate (any angle) Motor Type: Permanent split capacitor and 3 phase Rotation: Reversible Insulation: Class B minimum Finish: Gloss black powder coat 175 3-phase unpainted Enclosure: Open 1/80 & 1/10 HP TENV 1/20 HP TEFC 1/12 HP Included junction box Included capacitor on PSC units Rear shaft on PSC units 175-3 Phase IP 54 enclosure Optional Features • Power-off brake for PSC motors • Footplate kit Part number: P125-100-9998 Additional Information Current drawings and stock status available at www.bisongear.com See pages 86-87 for additional accessories Wiring diagram pages 88-91 ISIS - Products available off-shelf SNS - Min. order quantity and lead time 107 Series 3-Phase Inverter Duty 230V For more specifications see page 62 * Maximum overhung load on center of output shaft. ** Output torque is gear limited. *** All speeds given are at 60 HZ. For dual frequency units, speed will be 5/6 of rated speed. Gear & Engineering Corp. Want to know more? www.bisongear.com

Open the catalog to page 1

100 & 175 Series Parallel Shaft AC 100 & 175 AC 3.60 SQ. A AC PARALLEL SHAFT GEARMOTORS 3.34 OPTIONAL MOUNTING BASE OPTIONAL MOUNTING BRACKET Want to know more? www.bisongear.com Gear & Engineering Corp.

Open the catalog to page 2

All BISON catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list