Signature Motion SlickStick Bishop-Wisecarver is excited to offer our newest version of the SlickStick linear actuator. Our entry level actuator has been re-imagined and designed with the end user’s time and ease in mind. Featuring an elegant and simplified single-piece base extrusion that allows for both easy and flexible mounting as well as internal slot for cable routing, SlickStick can just as easily be used in a DIY home project as it can be used for a dusty packaging application. We don’t want you to struggle with any of the typical challenges that comme with buying an actuator anymore. SlickStick can be purchased with a motor and is equipped with an exciting and user-friendly motor mount that is capbable of accepting either a NEMA 17 or a NEMA 23 motor. Aren’t you ready for an out of the box, plug and play actuated system? • Travel ranges from 6” to 48” • Painless limit sensor position adjustment • Stainless steel lead screw with 0.5” or 1.0” lead • Excellent stiffness and rigidity in a small footprint • Easy repair and component replacement • Adapatable mounting for NEMA 17 or NEMA 23 motors • Optional home and travel limit sensors • Simplified time-saving design New Base Extrusion • Lower complexity single-piece design that eliminates expensive tube grinding • Easy and flexible mounting with t-slot feature on underside • More clearance for mounting fasteners with taller centerline • Lighter weight extrusion with internal voids for cable routing Improved Carriage Design • Field adjustable preload to the linear tube with fewer adjustments • Lower parts count with one sliding element liner instead of four • Simplified travel sensor features with integrated sensor target • Serviceable design with replaceable bearing liner and lead screw nut Optimized Motor Mount • Reduced parts count and complexity with integrated motor mount • Easy motor attachment with support for NEMA 17 and NEMA 23 frames • Integrated sensor mount for optional end of travel home sensor • Complete your project faster with motor ready mount Bishop-Wisecarver Expertly Designe

Lead Screw Drive Elements • Fully assembled and adjusted lead screw drive elements • Reduced screw whip due to tensioned lead screw design • High speed and long travel lengths with your choice of lead screw pitch Travel Limit Sensors • Reduced parts count and complexity with integrated motor mount design • Easy motor attachment with support for NEMA 17 and NEMA 23 frames • Integrated sensor mount for optional end of travel home sensor • Complete your project faster with motor ready mount Repair Kit for Service • Field adjustable preload to the linear tube with fewer adjustments • Lower parts...

Nptes: Travel lengths: 06.12,18.24.33,36.42,48. Unavailable in custom travel lengths. Daelgiidd to accent NEMA17or NEMA23 motor. Load Information SLICKSTICK (SLKA) LOAD CAPACITY *30lbf is the maximum load capacity if the carriage is not externally supported against rolling. The higher load capacities are possible if the carriage is externally supported. **It is recommended that offset loads be located 5 inches or less from the center of the carriage. When the loads are offset at greater distances, the carriage can vibrate during travel. Bishop-Wisecarver Expertly Designed - Delivered to Perform...