HTS telescopic ball bearing slides

Contents Introducing the HepcoMotion® HTS Feature and Benefits –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– RECOMMENDED APPLICATIONS –––––––––––––––––––––––––––––––––––––––––– STANDARD MATERIAL SPECIFICATIONS –––––––––––––––––––––––––––––––––– ORDERING INFORMATION CUSTOMIZED SLIDES –––––––––––––––––––––––––––––––––––––––––––––––––––––– FEATURE REFERENCE TABLE –––––––––––––––––––––––––––––––––––––––––––––– Load Rating

Hepco telescopic ball bearing slides are manufactured under strict quality control conditions backed by ISO 9002 certification using the highest quality materials and up to date manufacturing processes. These high quality slides are quiet, rigid under extended loads and due to the superior construction offer excellent smooth motion and low friction characteristics across the complete travel length. A reference table showing the complete range can be seen on page 5, each series having specific cross section and load carrying characteristics from Super Slim lightweight versions to Heavy Duty Units...

Explanation of terms Load rating X 1 Load rating X 0.25 max Load rating Load rating is the maximum recommended load for a pair of slides. Slides are side-mounted and based on a 10,000 cycle dynamic test. This test is based on the centre of gravity of the load being in the mid-point of the complete open travel and in the middle of the drawer (drawer width is 400 mm). For drawer widths in excess of 400mm please contact our technical department. Load rating & duty cycle Load rating and duty cycle are closely related. Load rating should be looked at in conjunction with the number of cycles i.e. high...

Explanation of terms cont. Travel (Extension) 3/4 Travel - slide extends approximately 3/4 of the total slide length, for applications not requiring complete access to drawer/components. Over Travel - slide extends further than the length of the slide allowing total and easy access to the drawer/ components, often a convenient feature. Both Side Travel - slide is able to extend in either direction allowing access to drawer or components from either side of the cabinet. Linear Motion - contains an inner moving member which movement is restricted to within the slide. Lever Disconnect - Actuate...

Mounting To acheive smooth running; Maintain parallelism between rails Secure balance by drawing in and out with 5–6Kg weight load before fixing. Examples of mounting A : Recommended B : Not Recommended, but usable C : Not Recommended Customized Slides Provide the solution to your suspension or movement requirements as shown below. The following are only some of the ways Slide rails can be customized to suit your application. Please contact our technical department for further information.

• Lever Disconnect • Lever Disconnect/Lock-Out • Lever Disconnect • Lever Disconnect/Lock-Out Over travel • Non-Disconnect Both Side Travel Linear Motion 3/4 travel • Non-Disconnect Rating at min travel Rating at max travel LOAD RATING Medium Light Super Slim

TS-20U LINEAR MOTION SLIDE Model TS-2011 • Linear motion • Load rating (per pair) 20kg at min travel 15kg at max travel • #4(M3) pan head screw • Non-disconnect Part number

TS-2020 DISCONNECT BOTH SIDE TRAVEL SLIDE Model TS-2020 • Both side travel • Load rating (per pair) 20kg at min travel 15kg at max travel • #4(M3) pan head screw • Disconnect Equal or under when closed Part number

SUPER SLIM TS–2021 3/4 TRAVEL SLIDE Model TS–2021 Load rating (per pair) 20kg at min travel 15kg at max travel Equal or under when closed Travel length Outer member Inner member Access hole Access hole Slide Part number Slide weight kg/pair

Model TS-2024 • 3/4 travel • Load rating (per pair) 20kg at min travel 15kg at max travel • #4(M3) pan head screw • Lever-Disconnect / Lock out | Equal or under when closed Front lock arm Part number

TS-2031 OVER TRAVEL SLIDE Model TS-2031 • Over travel • Load rating (per pair) 20kg at min travel 15kg at max travel • #4(M3) pan head screw • Non-disconnect jEqual or under when closed Part number

TS-U270 3/4 TRAVEL SLIDE (ALL STAINLESS STEEL) Model TS-U270 • 3/4 travel • Load rating (per pair) 29-38kg (see table) • #8(M4) pan head screw • Non-disconnect Part number

STOCK SERIES Model TS-U273 • Over travel • Load rating (per pair) 35-47kg (see table) • #8(M4) pan head screw • Non-disconnect

TS-270 3/4 TRAVEL SLIDE Model TS-270 • 3/4 travel • Load rating (per pair) 26-35kg (see table) • #8(M4) pan head screw • Non-disconnect Part number