HepcoMotion PDU2M Belt driven unit for moment loads

Introduction The HepcoMotion® PDU2M is a new addition to the popular PDU2 range of belt driven linear units. It shares all of the key features and benefits of the PDU2 but with increased load capacity and stiffness. L1 load capacity is 50% higher, MS moment load capacity is 200% higher, and MS stiffness is improved ten fold. These improvements make the PDU2M particularly suitable for use in multi-axis systems, as well as in demanding single-axis applications. The unit is available with a number of carriage designs which allow the quick and easy construction of multi-axis systems with a minimal...

Data & Dimensions The main dimensions of the PDU2M are shown in the drawing below. Further details can be obtained from the 2D and 3D CAD files, available from www.HepcoMotion3dcad.com. Hepco's Technical Department is on hand to assist with application enquiries or to undertake the design of complete mechanical systems. (where L = beam length in m). The above drawings show PDU2M units with carriages of type 1 & type 5. Carriage type 1 is the "general purpose" design. Note that the carriage wraps around the beam and the limit switches are mounted under the beam. This is suitable in applications...

How to order The ordering information below is given to assist communication, but you are recommended to discuss your application with Hepco first so that we can help to specify the best unit to suit your needs. Main Unit Product range = PDU2M L2468 = beam length in mm (max 6000). Note that stroke length is 175mm shorter. Shaft Handing R = right handed, L = left handed, D = double shaft (see picture below for example) T = beam with T-slots (this is the only option at present) DC = (belt) driven carriage (this is the only option at present) Carriage Type Number: select 1, 3 or 5 (type 3 shown...