- Catalogs
- BIOKAVITUS SRL
- C-THRU COALESCING OIL SEPARATORS
C-THRU COALESCING OIL SEPARATORS
C-THRU COALESCING OIL SEPARATORS
The C-Thru® Coalescing Oil Separators are innovative and patented units designed for the regeneration of industrial fluids by removing solid and liquid contamination from emulsion coolants and cleansing baths. These separators are widely used in the metalworking and pre-treatment industries to eliminate various types of oil pollution.
- Operates with electric or compressed air.
- Extends the life of emulsions and cleaning agents.
- Easy installation with magnetic plates.
- No consumables required.
- Compact and shock-resistant design.
- Patented transparent tank.
- Significantly extends the life of emulsions and cleaning agents.
- Ten times more efficient than traditional skimmers.
- Reduces waste disposal.
- Increases tool life.
- Compact design requires no floor space.
- Easy to clean.
- C-Thru - model 1560 NEW
- Electric pump with a flow rate of 14 l/m.
- Operates at 230 V, 50/60 Hz.
- Features a float and magnetic base.
- Maximum temperature of 40°C.
- Suitable for metalworking fluids, not for metal/chip dust.
- C-Thru - model 1600 NEW
- Compressed air pump with a flow rate of 18 l/m.
- Includes a flow regulator and quick connection fittings.
- Inlet metal filter with a stainless steel washable cartridge (250 µm).
- Maximum temperature of 65°C.
- Suitable for metalworking and cleaning fluids.
- C-Thru - model 1800 / 1800A
- High temperature resistant version NJT 1800.
- Acid resistant version NJT 1800A.
- pH range of 1.5-13.5.
- Maximum temperature of 70°C.
- Suitable for alkaline and acidic washing fluids.
Biokavitus SRL
Phone: +39 030 2187147
Email: [email protected]
Website: www.biokavitus.com
Catalog excerpts
INNOVATIVE AND SUSTAINABLE TECHNOLOGY EQUIPMENT FOR REGENERATION OF INDUSTRIAL FLUIDS
Open the catalog to page 1
The C-Thru® Separator is a unique, patented unit designed to remove solid and liquid contamination from emulsion coolants and cleansing baths. It is used throughout the metalworking and pre-treatment industries to remove every type of oil pollution (hydraulics, lubricants, sliding and anticorrosion oils, etc.), which have emulsified or are covering the surface of emulsion coolant tanks and cleansing baths. * Extends the life of emulsions and cleaning agents * Easy installation using magnetic plates * No consumables * Compact and shock resistant * Patented, transparent tank C-Thru®...
Open the catalog to page 2
C-Thru - model 1560 NEW Electric pump Flow rate 14 l/m 230 V , 50/60 Hz, Float Magnetic base Connect ng tubes resistant to crushing and twisting Maximum temperature 40°C Application: metalworking fluids. Not suitable for metal/chip dust. C-Thru - model 1600 NEW Compressed air pump Flow rate 18 l/m Flow regulator to adjust pump flow rate Quick connection fi@ngs Inlet metal filter with stainless steel washable cartridge 250 |im Magnetic base Connecting tubes resistant to crushing and twisting Maximum temperature 65°C Application: metalworking and cleaning fluids C-Thru - model 1800 / 1800A High...
Open the catalog to page 3
SOCIETA' DEL GRUPPO /TsmETAL WUJORK
Open the catalog to page 4All BIOKAVITUS SRL catalogs and technical brochures
- Liquid filter
- Industrial use filter
- Water cleaning system
- Industrial cleaning system
- Liquids separator
- Filtration unit
- Filter housing
- Stainless steel cleaning system
- Cartridge filter housing
- Liquid filter housing
- VOC-free liquid filtration unit
- Manual cleaning system
- Water purification unit
- Filtration system
- Solvent cleaning system
- Oil filter
- Self-backwashing filter
- Wire mesh pre-filter
- Liquid filtration system