Technical specifications Automatic auger feeding Automatic vacuum suction feeding The pellet condensing boiler BCH 25-150 kW Thermal efficiency based on the L.H.V. of the fuel Stunning performances Boiler model Output range Energy efficiency class Energy efficiency index (EEI) Seasonal energy efficiency • Unbeatable efficiency • Minimum fuel consumption • Lowest emissions • Unique dual temperature setpoint • Wide temperature range • Reduced maintenance time Efficiency at nominal/reduced output * Flue gas manometric pressure at nominal/reduced output Flue gas Temperature at nominal/reduced output Water capacity Outstanding equipment Operating temperature Maximum operating pressure Water flow/return connection • Stainless steel heat exchanger • Burner plate smart cleaning • Automatic ignition system • Automatic exchanger cleaning • Remote control via Smartphone • Ash extractor to removable drawer • Lambda probe • Graphic colour touchscreen Water drain connection Flue gas pipe diameter Total dry weight * Efficiency based on the lower heating value (L.H.V.) of the fuel Curvados Quintin, S.L. Polígono industrial Bakiola, 35-B 48498 Arrankudiaga, Bizkaia T. +34 946 481 764 www.biocurve-heating.com ** The flue gas pipe diameter of these units is settled by the working temperature of the boiler, either under condensing (narrower diameter) or non-condensing conditions (wider diameter). Non-binding data. The images are symbolic representations. Specifications are subject to change without notice. BioCurve only recommends ENplus A1 sealed pellets. years warra
Open the catalog to page 1Dual control A permanent optimal combustion thanks to the dual control of lambda probe and chamber temperature sensor. Automatic cleaning by water jets, enabling an optimal energy yield for a long time. Patented heat exchanger The only biomass spiral heat exchanger, made completely of stainless steel, holds an exchange surface up to 50% larger than a standard exchanger. Our pioneering biomass dual setpoint allows the perfect performance at each installation need, from 27ºC to 80ºC. Return temperature without constrains BCH boilers work smoothly under any condition, either condensing or non-condensing....
Open the catalog to page 22 Pages